Pepperl+Fuchs WCS-IS311 WCS interface module
Item Number: WCS-IS311
- Integrated display
- Long possible cable legth between reading head and SSI master
- DIN rail mounting
- Overview
- Datasheet
- Alternative numbers
- Comments
| Transfer rate | max. 500 kHz |
| RS485 termination resistor | integrated |
| Connectable read heads | WCS-LS211 |
| Bus termination resistor | integrated |
| Transfer rate | max. 187.5 kBit/s |
| Transmission method | half duplex |
| Refresh cycle of read head | 1 ms |
| Housing width | 100 mm |
| Power consumption | 2 W (without read heads) |
| Data output format | Gray code |
| Interface type | SSI |
| Operating voltage | 24 V DC В± 20 % |
| Installation position | any position |
| Installation | DIN rail mounting |
| Connection type | removable terminal block |
| Connection of | control system |
| Relative humidity | 80 % |
| Noise immunity | DIN EN 50082-2 |
| Mass | approx. 350 g |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Housing height | 74 mm |
| Degree of protection | IP20 |
| Interface type | RS-485 |
| Connection of | Read head |
| Emitted interference | EN 55011 |
| Operating temperature | 0 ... 55 В°C (32 ... 131 В°F) |
| Material | plastic |
Comments
No comments yet