Pepperl+Fuchs WCS-PG310 WCS interface module
Item Number: WCS-PG310
- Up to 4 read heads can be connected
- DIN rail mounting
- Integrated switch
- PROFIBUS interface
- Overview
- Datasheet
- Alternative numbers
- Comments
EAC conformityTR CU 020/2011
| Emitted interference | EN 55011, cl. A: 2007 |
| Mission Time (TM) | 20 a |
| Relative humidity | ≤ 80 % |
| Diagnostic Coverage (DC) | 0 % |
| Connectable read heads | WCS...-LS221 , WCS...-LS121 |
| RS485 termination resistor | switchable |
| Interface type | PROFIBUS DP V1 |
| Refresh cycle of read head | 1 ms |
| Operating voltage | 10 ... 30 V DC |
| Power consumption | ≤ 3.6 W (without read heads) |
| MTTFd | 180 a |
| Bus termination resistor | switchable |
| Transfer rate | 62.5 kBit/s |
| Data output format | binary code |
| Installation position | any position |
| Installation | DIN rail mounting |
| Housing depth | 115 mm |
| Connection of | control system |
| Connection type | Interface 1: 9-pin Sub-D connector Interface 2: terminal connection ≤ 2.5 mm2 , 7-pin |
| Housing width | 23 mm |
| Degree of protection | IP20 |
| Interface type | RS-485 |
| Mass | approx. 200 g |
| Noise immunity | EN 61000-6-2:2005 |
| Transfer rate | max. 12 MBit/s , Automatic baud rate detection |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Transmission method | half duplex |
| Operating temperature | 0 ... 55 В°C (32 ... 131 В°F) , no moisture condensation |
| Material | plastic |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Housing height | 111 mm |
| Connection of | control system |
Comments
No comments yet