Pepperl+Fuchs WCS-PNG210
WCS interface module
- Up to 4 read heads can be connected
- DIN rail mounting
- Ethernet interface with PROFINET
- Integrated switch
- Overview
- Comments
Transfer rate | 100 MBit/s |
Data output format | binary code |
Connection of | control system |
Housing width | 23 mm |
Diagnostic Coverage (DC) | 0 % |
MTTFd | 180 a |
Transfer rate | 62.5 Bit/s |
Installation position | any position |
Material | plastic |
Transfer rate | 100 MBit/s |
Relative humidity | 80 % |
Operating temperature | 0 ... 55 В°C (32 ... 131 В°F) , no moisture condensation |
Protocol | PROFINET IO |
Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
Protocol | PROFINET IO |
CCC approval | CCC approval / marking not required for products rated 36 V |
Installation | DIN rail mounting |
Interface type | For WCS-LS121 and WCS-LS221 readers Switchable terminator Update cycle of reader: 1 ms |
Protocol | half duplex |
Emitted interference | EN 55011, cl. A: 2007 |
Power consumption | 3.6 W (without read heads) |
Connection of | control system |
Data output format | binary code |
Mission Time (TM) | 20 a |
Noise immunity | EN 61000-6-2:2005 |
Housing height | 118 mm |
Physical | RS-485 |
EAC conformity | TR CU 020/2011 |
Interface type | Ethernet; 100 BASE-TX |
Interface type | Ethernet; 100 BASE-TX |
Connection type | Interface 1 and 2: RJ-45 socket, 8-pin Interface 3: terminal connection 2.5 mm2 , 5-pin |
Mass | approx. 200 g |
Operating voltage | 10 ... 30 V DC |
Degree of protection | IP20 |
People also buy
Comments
No comments yet