Pepperl+Fuchs WCS3B-LS2**
Read head
- RS 485 interface
- Non-contact, absolute position encoder
- Automatic detection of dirt accumulation
- Output of position and speed
- Overview
- Comments
| Mass | 500 g |
| Ordering information | Mounting plate included with delivery |
| Mission Time (TM) | 10 a |
| Measuring range | max. 314.5 m |
| Connection type | 5-pin, M12 x 1 connector |
| Resolution | В± 0.4 mm (1,250 positions/m) |
| Operating voltage | 10 ... 30 V DC |
| Emitted interference | DIN EN 61000-6-4 , DIN EN 12015 |
| Diagnostic Coverage (DC) | 0 % |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Output velocity | switch output , short-circuit protected (only with Option S, speed output) |
| Relative humidity | 90 % , noncondensing |
| MTTFd | 50 a |
| Transfer rate | Baud rate 19.2 kBit/s ... 187.5 kBit/s (to be specified with order) |
| Display | Display module, 6-digit (only with option D, display) adaptable to installation position |
| Passage speed | 12.5 m/s |
| CSA approval | cCSAus Certified, General Purpose Class 2 power source |
| Velocity indicator | LED yellow (only with Option S, speed output) off, if speed limit is exceeded (instead of data flow display) |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Termination | with RS 485 termination |
| Data flow indicator | LED yellow: data communication active |
| Error indicator | LED red flashing: read head outside of code rail solid on: internal diagnostic test failed |
| Power consumption | 2 VA with Option H, heating: 11 VA at 24 V DC |
| Degree of protection | IP54 |
| Vibration resistance | DIN EN 60068-2-6, sine, 5 g, 10 - 2000 Hz, 10 cycles |
| Shock resistance | DIN EN 60068-2-27, half sine 30 g, 18 ms |
| Operating temperature | 0 ... 60 В°C (32 ... 140 В°F) with Option H, heating: -40 ... 60 В°C (-40 ... 140 В°F) |
| Operation indicator | LED green: power on |
| Switching voltage | Operating voltage |
| Interface type | RS 485 interface |
| Noise immunity | DIN EN 61000-6-2 , DIN EN 12016 |
| Data output code | binary code |
| Free tolerances to code rail | horizontal: 31 mm ( В± 15.5 mm ) vertical: 28 mm ( В± 14 mm ) |
Comments
No comments yet