Pepperl+Fuchs WCS3B-LS211 Read head
Item Number: WCS3B-LS211
- RS 485 interface
- Non-contact, absolute position encoder
- Automatic detection of dirt accumulation
- Overview
- Datasheet
- Alternative numbers
- Comments
Data output codebinary code
| Protocol | 1 , 2 |
| Mission Time (TM) | 10 a |
| CSA approval | cCSAus Certified, General Purpose Class 2 power source |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Transfer rate | 187.5 kBit/s |
| Termination | with RS 485 termination |
| Operating voltage | 10 ... 30 V DC |
| Free tolerances to code rail | horizontal: 31 mm ( В± 15.5 mm ) vertical: 28 mm ( В± 14 mm ) |
| Degree of protection | IP54 |
| Emitted interference | DIN EN 61000-6-4 , DIN EN 12015 |
| Measuring range | max. 314.5 m |
| Passage speed | 12.5 m/s |
| Operating temperature | 0 ... 60 В°C (32 ... 140 В°F) |
| Interface type | RS 485 interface |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Shock resistance | DIN EN 60068-2-27, half sine 30 g, 18 ms |
| Power consumption | 2 VA |
| Resolution | В± 0.4 mm (1,250 positions/m) |
| Data flow indicator | LED yellow: data communication active |
| Address | 0 |
| Noise immunity | DIN EN 61000-6-2 , DIN EN 12016 |
| Operation indicator | LED green: power on |
| Diagnostic Coverage (DC) | 0 % |
| Vibration resistance | DIN EN 60068-2-6, sine, 5 g, 10 - 2000 Hz, 10 cycles |
| Mass | 500 g |
| Connection type | 5-pin, M12 x 1 connector |
| Error indicator | LED red flashing: read head outside of code rail solid on: internal diagnostic test failed |
| Relative humidity | 90 % , noncondensing |
| Ordering information | Mounting plate included with delivery |
| MTTFd | 50 a |
Comments
No comments yet