Pepperl+Fuchs WHA-ADP2-F8B2-0-A0-Z1-Ex1
WirelessHART Adapter
- 1-channel
- Installation in Zone 1, Zone 21, and Class I Div. 1
- WirelessHART Adapter
- Battery operated
- Also supplies field device
- Input 2-wire HART transmitters and 2-wire HART current sources
- Output WirelessHART wireless interface
- Direct mounting on HART or 4 mA ... 20 mA field device
- Rotatable antenna
Item Number:
WHA-ADP2-F8B2-0-A0-Z1-Ex1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
MaterialAluminum
| Designation | battery W-BAT-B2-Li mandatory for use in connection with hazardous areas (order separately) mounting set W-ACC-F8MK threads (NPT 1/2"", NPT 3/4"", G 1/2, M20) |
| Degree of protection | IP66 |
| Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 test setup and execution acc. to EN 60068-2-60 |
| Output rated operating current | 4 ... 20 mA |
| Suitable field devices | usable for: - one point-to-point connection with a HART field device, or - one point-to-point connection with a 4 ... 20 mA field device, or - up to four externally powered HART field devices operating in multidrop mode |
| Dimensions | 92 x 89.5 x 92.8 mm (without cable glands and antenna) |
| Degree of protection | IEC 60529 |
| Influence of ambient temperature | current input: 5 µA/K |
| Output variables | PV: loop current SV, TV, QV:configurable according to user requirement - adapter: temperature, battery voltage, energy consumed and estimated battery life-time - 4 ... 20 mA device: scaled or linearized process value - HART device: up to four process variables |
| Current | 4 ... 20 mA |
| Vibration resistance | 20 ... 2000 Hz, 0,01 g2/Hz |
| Radio and telecommunication terminal equipment | The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning. |
| EU-Type Examination Certificate | BVS 17 ATEX E 029 |
| Accuracy | current input: 0.125 % of measuring range |
| Connection | terminals 1, 2, 3, 4, 5, 6 multiple wirings available , depending on operating mode |
| Mounting | mounting on field device , panel or pole mounting |
| Mass | approx. 1000 g |
| Parameter assignment | - wireless transmit power: configurable to 0 dBm or 10 dBm (EIRP) - device variables mapping - publishing of up to ten burst messages in a wireless network, period and trigger mode selectable - notification of up to five events from adapter and/or connected device(s) in a wireless network - scaling and linearization of 4 ... 20 mA signal of connected analog device - tuning of supply parameters for the connected device - locking/unlocking of device parameterization |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Rated voltage | 7.2 V DC , battery operated |
| Supply | loop power for field devices voltage 8 ... 23 V DC, adjustable in steps of 0.1 V |
Comments
No comments yet