Pepperl+Fuchs WHA-BLT-F9D0-N-A0-Z0-Ex1
Bullet WirelessHART Adapter
- Installation in Zone 0, 20
- Installation in Class I, II, Division 1
- Installation in Class III
- Installation in Class I, Division 2
- Ex i circuits for Ex i field devices
- Cast aluminum housing
- Loop powered
- Direct mounting on HART or 4 mA ... 20 mA field device
- Encapsulated antenna
- Up to 8 field devices in multidrop
- Overview
- Comments
| CSA approval | FM 17 NCA 0004 FM 17 CA 0102 X |
| Degree of protection | IEC 60529:2013 |
| Supply | loop power for field devices voltage: 1 ... 2.5 V DC, adjustable in steps of 0.5 V |
| EU-Type Examination Certificate | FM 17 ATEX 0046 X |
| Output rated operating current | 3.2 ... 25 mA |
| Mass | 460 g |
| Radio and telecommunication terminal equipment | The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning. |
| Ambient temperature | temperature class T5: -40 ... 85 В°C (-40 ... 185 В°F) temperature class T6: -40 ... 75 В°C (-40 ... 167 В°F) |
| Dimensions | 60.8 x 60.8 x 100 mm (l x w x h) |
| Connection | - 5 wires, 600 mm long, exiting from male thread NPT1/2 - 1 external grounding point |
| Interface | internal antenna |
| Communication | WirelessHART specifications - physical layer: IEEE 802.15.4.2006 - frequency band: 2.4 GHz (ISM band, licence free) - maximum transmit power: +10 dBm - outdoor transmission range: 235 m - communication standard: WirelessHART |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Rated voltage | 7 ... 30 V DC |
| Material | Aluminum alloy with polyurethane enamel paint |
| Rated current | < 1 mA , max. 25 mA |
| Degree of protection | IP67 |
| Relative humidity | max. 100 % |
| FM approval | FM 17 NUS 0010 FM 17 US 0191 X |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Comments
No comments yet