Pepperl+Fuchs WHA-GW-F2D2-0-AS-Z2-ETH
WirelessHART Gateway

Pepperl+Fuchs WHA-GW-F2D2-0-AS-Z2-ETH
  • MODBUS WirelessHART Gateway
  • Graphical network analysis
  • Simple and automatic configuration options
  • Ethernet and RS 485 interface
  • HART and MODBUS protocol via both interfaces
  • Input WirelessHART wireless interface
  • 24 V DC supply
  • Redundant power supply connections
Item Number: WHA-GW-F2D2-0-AS-Z2-ETH
7191.06
-
+
Total price: 7191.06
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments

Shock resistanceEN 60068-2-27

Radio and telecommunication terminal equipmentThe usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning.
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Degree of protectionIEC 60529
Control elements2 push buttons:
- restore HART configuration
- restore communication configuration
DIP switches:
- baud rate
- RS-485 address
- RS-485 termination
- security mode
Interface 2RS-485
Power consumption< 5 W
Degree of protectionIP66/IP67
IECEx approvalIECEx FMG 12.0002
Interfaceomnidirectional dipole antenna, removable
Display elementsLED PWR (power supply status), one green LED
LED COM (communication status), three yellow LEDs
LED FLT (fault signal), one red LED
Connectionscrew terminals for
- 0.2 ... 4 mm2 (rigid wire)
- 0.2 ... 2.5 mm2 (flexible wire)
Interface 1Ethernet
10 BASE-T/100 BASE-TX , full galvanic isolation
CommunicationWirelessHART specifications
- physical layer: IEEE 802.15.4.2006
- frequency band: 2.4 GHz (ISM band, licence free)
- transmission rate: 250 kBit/s
- maximum transmit power: +10 dBm (EIRP)
- transmission range: outdoor 250 m, indoor 50 m (under reference conditions)
- communication standard: WirelessHART acc. to IEC 62591
Relative humidity5 ... 95 %, noncondensing
Vibration resistanceEN 60068-2-6
EU-Type Examination CertificateFM 12 ATEX 0061
Rated voltage20 ... 30 V DC SELV/PELV
Corrosion resistanceacc. to ISA-S71.04-1985, severity level G3
test setup and execution acc. to EN 60068-2-60
Interface/interfacebasic insulation according to IEC 61140, rated insulation voltage 50 Veff
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
FM approvalCoc3042646
Mountingwall mounting
Massapprox. 1 kg
Dimensions258 mm x 114 mm x 84 mm
without antenna and cable glands
Interface/power supplybasic insulation according to IEC 61140, rated insulation voltage 50 Veff

Comments

No comments yet

Write a comment