Schneider Electric ZENL1121

Push Button

IN STOCK!!!

The Schneider Electric ZENL1121 is a 22mm push button contact block designed for panel mounting. It is part of the Harmony series and is specifically intended for use with XAPS control stations and XB5 Ø 22 mm control and signaling units.

Datasheet:

• Contacts Type and Composition: 1 NC (Normally Closed)
• Operating Force: 2 N for NC changing electrical state
• Mechanical Durability: Up to 10 million cycles
• Operating Travel: 0.06 in (1.5 mm) for NC changing electrical state, 0.2 in (4.3 mm) total travel
• Maximum Resistance Across Terminals: 25 MOhm
• Short-Circuit Protection: 10 A cartridge fuse gG IEC 60947-5-1
• Rated Insulation Voltage (Ui): 600 V
• Rated Impulse Withstand Voltage (Uimp): 6 kV
• Rated Operational Current (Ie): 3 A for 240 V, AC-15, A600; 6 A for 120 V, AC-15, A600; 0.1 A for 600 V, DC-13, Q600; 0.27 A for 250 V, DC-13, Q600; 0.55 A for 125 V, DC-13, Q600; 1.2 A for 600 V, AC-15, A600
• Electrical Durability: Up to 1 million cycles for AC-15, 2 A at 230 V, 3600 cycles/hour
• Electrical Reliability: Λ < 10exp(-6) for 5 V 1 mA in a clean environment
• Operating Temperature Range: -40°C to 70°C
• IP Degree of Protection: IP20
• Vibration Resistance: 5 g from 12 to 500 Hz
• Shock Resistance: 30 g for 18 ms half sine wave acceleration

Advantages:

• Simple Modular Design: Facilitates post-installation servicing, modification, and adaptation of machines by non-specialists.
• High Endurance: Capable of withstanding up to 1 million cycles, reducing maintenance and damage.
• Clear Labelling: Contact wiring and terminal names are clearly labeled on the side of the block.
• Wide Operating Temperature Range: Versatile usage from -40°C to 70°C.
• Clear Color Scheme: Differentiates NO and NC contact block types easily.