Sick A3M60B-S1PB013X13
A3M60 Absolute encoder
- Robust absolute multiturn encoder with up to 31 bits (14 bits singleturn and 17 bits multiturn)
- Face mount flange, servo flange or blind hollow shaft
- Compact design (<70 mm)
Item Number:
A3M60B-S1PB013X13
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Specification:
Part Number | 1051018 |
Permissible Load capacity of shaft: | 40 N (axial), 80 N (radial) |
Enclosure rating: | IP 65 (according to IEC 60529), Shaft, IP 67 (according to IEC 60529), housing |
Bus termination: | DIP switch |
Connection type: | 3 x M12, 5-pin, axial |
Data transmission rate (baud rate): | ≤ 12 MBaud |
Mass: | 0.28 kg |
Storage temperature range: | -40 °C ... +100 °C |
Shaft length: | 10 mm |
Permissible relative humidity: | 95 % (Condensation not permitted) |
Reverse polarity protection: | 1 |
Operating voltage range: | 10 V ... 32 V |
Electrical interface: | PROFIBUS DP |
Initialization time: | Ca. 1 s |
Working temperature range: | -10 °C ... +70 °C |
Data protocol: | PROFIBUS DP V0, PROFIBUS DP V1 + V2 |
Max. number of steps per revolution: | 8,192, programmable |
Mechanical interface: | Solid shaft, Servo flange |
Resistance to shocks: | 100 g, 6 ms (according to EN 60068-2-27) |
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) |
Start up torque: | 1 Ncm (+20 °C) |
Resolution power: | 8,192 x 8,192 |
Operating torque: | 0.8 Ncm (+20 °C) |
Flange material: | Aluminum |
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
Repeat accuracy: | ± 0.25 ° (at room temperature) |
Resolution: | 13 bit x 13 bit |
Shaft diameter: | 6 mm |
Max. angular acceleration: | 500,000 rad/s? |
Bus: | PROFIBUS DP |
Error limits: | ± 0.5 ° (at room temperature) |
Housing material: | Aluminum |
Bearing lifetime: | 3.0 x 10^9 revolutions |
Max. number of revolutions: | 8,192, programmable |
Shaft material: | Stainless steel |
MTTFd: mean time to dangerous failure: | 60 a (EN ISO 13849-1) |
People also buy
Comments
No comments yet