Sick AFM60A-BDEB018X12 AFM60 Absolute encoder

Sick AFM60A-BDEB018X12
Item Number: AFM60A-BDEB018X12
  • High-resolution 30-bit absolute encoder (18-bit singleturn and 12-bit multiturn)
  • Face mount flange, servo flange and blind hollow shaft
  • Connection type: 3 x M12 axial connector
Total price: 622.42
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments


Part Number1059057
Cycle time:125 µs ... 100 ms
Operating torque:0.6 Ncm (+20 °C)
Enclosure rating:IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
Shaft diameter:10 mm
Measuring step deviation:± 0.002 °
Mass:0.2 kg
Resolution power:262,144 x 4,096
Shaft material:Stainless steel
Bus interface:EtherCAT, CoE (CiA DS-301)
Bearing lifetime:3.0 x 10^9 revolutions
Resolution:18 bit x 12 bit
Max. number of revolutions:4,096
Reverse polarity protection:0
Resistance to shocks:100 g, 6 ms (according to EN 60068-2-27)
MTTFd: mean time to dangerous failure:80 a (EN ISO 13849-1)
Maximum operating speed:6,000 /min
Permissible relative humidity:90 % (condensation of the optical scanning not permitted)
Operating voltage range:10 V DC ... 30 V DC
Data transmission rate (baud rate):10 Mbit/s / 100 Mbit/s
Encoder profile:CiA DS-406
Permissible movement radial static/dynamic:≤ 0.3 mm, ≤ 0.05 mm
Working temperature range:-30 °C ... +85 °C
Storage temperature range:-40 °C ... +100 °C, without package
Max. angular acceleration:500,000 rad/s²
EMC:(according to EN 61000-6-2 and EN 61000-6-3)
Repeat accuracy:≤ 0.002 °
Resistance to vibration:30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
Start up torque:0.8 Ncm (+20 °C)
Electrical interface:EtherCAT
Initialization time:Ca. 6 s
Error limits:≤ 0.03 °
Max. number of steps per revolution:262,144
Permissible movement axial static/dynamic:≤ 0.5 mm, ≤ 0.1 mm
Moment of inertia of the rotor:40 gcm²
Mechanical interface:Blind hollow shaft
Connection type:3 x connector M12, 4-pin, axial
Type of mounting shaft:Blind hollow shaft
Endless operating functionality:1


No comments yet

Write a comment