Sick AFM60A-S1EB018X12
Absolute encoder
LFP Cubic / TDR level meters
1062247
Item Number:
AFM60A-S1EB018X12
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Specification:
Part Number | 1059061 |
MTTFd: mean time to dangerous failure: | 80 a (EN ISO 13849-1) |
Start up torque: | 0.5 Ncm (+20 °C) |
Type of mounting shaft: | Solid shaft, servo flange |
Mechanical interface: | Solid shaft, Servo flange |
Resistance to shocks: | 100 g, 6 ms (according to EN 60068-2-27) |
Cycle time: | 125 µs ... 100 ms |
Shaft diameter: | 6 mm |
Resolution: | 18 bit x 12 bit |
Encoder profile: | CiA DS-406 |
Reverse polarity protection: | 0 |
Error limits: | ≤ 0.03 ° |
Maximum operating speed: | 9,000 /min |
Measuring step deviation: | ± 0.002 ° |
Bus interface: | EtherCAT, CoE (CiA DS-301) |
Operating voltage range: | 10 V DC ... 30 V DC |
Connection type: | 3 x connector M12, 4-pin, axial |
Electrical interface: | EtherCAT |
Max. angular acceleration: | 500,000 rad/s² |
Resolution power: | 262,144 x 4,096 |
Initialization time: | Ca. 6 s |
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) |
Endless operating functionality: | 1 |
Storage temperature range: | -40 °C ... +100 °C, without package |
Data transmission rate (baud rate): | 10 Mbit/s / 100 Mbit/s |
Operating torque: | 0.3 Ncm (+20 °C) |
Bearing lifetime: | 3.0 x 10^9 revolutions |
Working temperature range: | -30 °C ... +85 °C |
Permissible Load capacity of shaft: | 40 N (axial), 80 N (radial) |
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
Shaft material: | Stainless steel |
Repeat accuracy: | ≤ 0.002 ° |
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side |
Moment of inertia of the rotor: | 6.2 gcm² |
Max. number of revolutions: | 4,096 |
Max. number of steps per revolution: | 262,144 |
Mass: | 0.2 kg |
- In accordance with DIN ISO 1319-1, position of the upper and lower error limit depends on the installation situation, specified value refers to a symmetrical position, i.e. deviation in upper and lower direction is the same.
- In accordance with DIN ISO 55350-13; 68.3% of the measured values are inside the specified area.
People also buy
Comments
No comments yet