Sick AFM60A-S4PK262144 AFM60 Absolute encoder

Sick AFM60A-S4PK262144
Item Number: AFM60A-S4PK262144
  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
Total price: 552.73
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments

Sick AFM60A-S4PK262144 is outdated.


Part Number1037510
Moment of inertia of the rotor:6.2 gcm²
Connection type:Cable, 8-wire, universal, 1.5 m
Operating voltage range:4.5 V DC ... 32 V DC
Interface signals:Clock +, Clock -, Data +, Data-
CW/CCW (counting sequence when turning):L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V)
Measuring step deviation:± 0.002 °
MTTFd: mean time to dangerous failure:250 a (EN ISO 13849-1)
Power consumption:0.5 W (without load)
Type of mounting shaft:Solid shaft with flat
Max. angular acceleration:500,000 rad/s²
Max. number of revolutions:4,096
Measuring step:0.014 ° 360 ° / number of steps
Initialization time:50 ms
Clock frequency:2 MHz
Storage temperature range:-40 °C ... 100 °C, without package
Permissible Load capacity of shaft:40 N (axial), 80 N (radial)
Max. number of steps per revolution:262,144
Operating torque:0.3 Ncm (20 °C)
Start up torque:0.5 Ncm (20 °C)
Resistance to shocks:60 g, 6 ms (according to EN 60068-2-27)
Electrical interface:SSI/Gray, programmable
Bearing lifetime:3.0 x 10^9 revolutions
Resolution:18 bit x 12 bit
Enclosure rating:IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
Maximum operating speed:9,000 /min
Code type:Gray
Resolution power:262,144 x 4,096
:Face mount flange
Reverse polarity protection:1
Permissible relative humidity:90 % (condensation of the optical scanning not permitted)
Mechanical interface:Solid shaft with flat, Face mount flange
Working temperature range:-30 °C ... 100 °C
Code sequence:CW/CCW, parameter adjustable
Resistance to vibration:20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
SET (electronic adjustment):H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V)
Error limits:± 0.03 °
EMC:(according to EN 61000-6-2 and EN 61000-6-3)
Shaft diameter:10 mm
Repeat accuracy:0.002 °


No comments yet

Write a comment