Sick AFM60B-TEPC032768 AFM60 Absolute encoder

Sick AFM60B-TEPC032768
Item Number: AFM60B-TEPC032768
  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
610.81
Quantity
-
+
Total price: 610.81
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments

Specification:

Part Number1038903
Moment of inertia of the rotor:40 gcm²
Resolution:15 bit x 12 bit
Maximum operating speed:9,000 /min
CW/CCW (counting sequence when turning):L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V)
Interface signals:Clock +, Clock -, Data +, Data-
Measuring step:0.01 °
SET (electronic adjustment):H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V)
Operating torque:0.6 Ncm (20 °C)
Mechanical interface:Through hollow shaft
Clock frequency:2 MHz
Storage temperature range:-40 °C ... 100 °C, without package
Bearing lifetime:3.0 x 10^9 revolutions
Permissible movement axial static/dynamic:± 0.5 mm, ± 0.2 mm
Shaft diameter:12 mm
Repeat accuracy:0.002 °
Permissible movement radial static/dynamic:± 0.3 mm, ± 0.1 mm
Mass:0.2 kg
Resistance to shocks:70 g (according to EN 60068-2-27)
Resistance to vibration:30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
MTTFd: mean time to dangerous failure:250 a (EN ISO 13849-1)
Power consumption:0.5 W (without load)
Permissible relative humidity:90 % (condensation of the optical scanning not permitted)
Initialization time:50 ms
Error limits:± 0.05 °
Resolution power:32,768 x 4,096
Max. number of steps per revolution:32,768
EMC:(according to EN 61000-6-2 and EN 61000-6-3)
Max. number of revolutions:4,096
Electrical interface:Connector M12, 8-pin, radial
Operating voltage range:4.5 V DC ... 32 V DC
Measuring step deviation:± 0.01 °
Working temperature range:-30 °C ... 100 °C
Start up torque:0.8 Ncm (20 °C)
Max. angular acceleration:500,000 rad/s²
Enclosure rating:IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side

Comments

No comments yet

Write a comment