Sick AFS60A-BDEB262144 AFS60 Absolute encoder

Sick AFS60A-BDEB262144
Item Number: AFS60A-BDEB262144
  • High-resolution 30-bit absolute encoder (18-bit singleturn and 12-bit multiturn)
  • Face mount flange, servo flange and blind hollow shaft
  • Connection type: 3 x M12 axial connector
Total price: 544.98
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments


Part Number1059068
Endless operating functionality:0
Error limits:≤ 0.03 °
Mechanical interface:Blind hollow shaft
Shaft diameter:10 mm
MTTFd: mean time to dangerous failure:80 a (EN ISO 13849-1)
Permissible movement axial static/dynamic:≤ 0.5 mm, ≤ 0.1 mm
EMC:(according to EN 61000-6-2 and EN 61000-6-3)
Start up torque:0.8 Ncm (+20 °C)
Encoder profile:CiA DS-406
Cycle time:125 µs ... 100 ms
Permissible movement radial static/dynamic:≤ 0.3 mm, ≤ 0.05 mm
Operating torque:0.6 Ncm (+20 °C)
Enclosure rating:IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
Data transmission rate (baud rate):10 Mbit/s / 100 Mbit/s
Measuring step deviation:± 0.002 °
Type of mounting shaft:Blind hollow shaft
Mass:0.2 kg
Operating voltage range:10 V DC ... 30 V DC
Bus interface:EtherCAT, CoE (CiA DS-301)
Shaft material:Stainless steel
Max. angular acceleration:500,000 rad/s²
Max. number of revolutions:1
Working temperature range:-30 °C ... +85 °C
Moment of inertia of the rotor:40 gcm²
Max. number of steps per revolution:262,144
Permissible relative humidity:90 % (condensation of the optical scanning not permitted)
Resistance to shocks:100 g, 6 ms (according to EN 60068-2-27)
Reverse polarity protection:0
Resistance to vibration:30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
Electrical interface:EtherCAT
Bearing lifetime:3.0 x 10^9 revolutions
Maximum operating speed:6,000 Hz
Connection type:3 x connector M12, 4-pin, axial
Repeat accuracy:≤ 0.002 °
Storage temperature range:-40 °C ... +100 °C, without package
Resolution power:262,144 x 1
Resolution:18 bit
Initialization time:Ca. 6 s


No comments yet

Write a comment