Sick AFS60A-S4AC262144 AFS60 Absolute encoder

Sick AFS60A-S4AC262144
Item Number: AFS60A-S4AC262144
  • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
  • Face mount flange, servo flange, blind or through hollow shaft
  • SSI, SSI + Incremental or SSI + Sin/Cos interface
Total price: 393.01
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments


Part Number1037442
Resolution power:262,144 x 1
Connection type:Male connector M12, 8-pin, radial
CW/CCW (counting sequence when turning):L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V)
Clock frequency:2 MHz
Working temperature range:-30 °C ... 100 °C
Interface signals:Clock +, Clock -, Data +, Data-
Resistance to vibration:20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
Permissible relative humidity:90 % (condensation of the optical scanning not permitted)
Bearing lifetime:3.0 x 10^9 revolutions
Electrical interface:SSI/Gray
Maximum operating speed:9,000 /min
Power consumption:0.5 W (without load)
Resistance to shocks:60 g, 6 ms (according to EN 60068-2-27)
Max. number of revolutions:1
Shaft diameter:10 mm
Operating voltage range:4.5 V DC ... 32 V DC
Start up torque:0.5 Ncm (20 °C)
EMC:(according to EN 61000-6-2 and EN 61000-6-3)
Permissible Load capacity of shaft:40 N (axial), 80 N (radial)
Enclosure rating:IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side
SET (electronic adjustment):H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V)
Storage temperature range:-40 °C ... 100 °C, without package
Operating torque:0.3 Ncm (20 °C)
Reverse polarity protection:1
Measuring step deviation:± 0.002 °
Max. number of steps per revolution:262,144
Code type:Gray
Initialization time:50 ms
Max. angular acceleration:500,000 rad/s²
MTTFd: mean time to dangerous failure:250 a (EN ISO 13849-1)
Code sequence:CW/CCW, parameter adjustable
Mechanical interface:Solid shaft with flat, Face mount flange
Mass:0.26 kg
Moment of inertia of the rotor:6.2 gcm²
Measuring step:0.014 ° 360 ° / number of steps
Repeat accuracy:0.002 °
Type of mounting shaft:Solid shaft with flat
Error limits:± 0.03 °
:Face mount flange


No comments yet

Write a comment