Sick AHM36A-BBQC000A30

Absolute Multiturn encoder

Sick AHM36A-BBQC000A30

Datasheet:

• Article: 1108584
• Resolution (maximum number of steps per revolution x maximum number of revolutions): 14 bit x 12 bit (16.384 x 4.096)
• Tolerances G: 0.35° (at 20°C)
• Repetitive standard deviation ?_r: 0.2° (at 20°C)
• Communication interface: IO-Link
• Communication interface, detailed description: IO-Link V1.1 / COM3 (230.4 kBaud)
• Smart Sensor: Efficient data exchange, Enhanced Sensing, Diagnostics, Smart Task
• Process parameters: Position, Speed, Electronic cams, Limit values, linear position, linear speed, Errors and warnings, switching signals on pin 2, length, switching signals on pin 4
• Parameter data: Number of steps per revolution, Number of revolutions, PRESET, Counting direction, Readout speed for speed calculation, Unit of measure for speed output, Rotary axis function, Electronic cams (2 channels x 8 cams), Limit values, 360° Linear Length Measurement, Pin 2 Configuration, Length Measurement Configuration (IO-Link Mode), Length Control Configuration (IO-Link and SIO Mode), Length Trigger Configuration (SIO Mode),
• Available diagnostic data: Minimum and maximum temperature, maximum speed, Power supply counter, Power supply/operation hours counter, Direction change counter/clockwise/counterclockwise movement counter, Minimum and maximum operating voltage, distance traveled, Trigger count on pin 2
• Status information: Via status LED
• Initialization time: 2 s
• Cycle time: ? 3.2 ms
• Discrete input/switching output: ?
• Input frequency, pin 2: ? 100 Hz
• Output frequency, pin 2: ? 100 Hz
• Output frequency, pin 4: ? 100 Hz
• Standby time: 3.5 ms
• Connection type: Connector, M12, 4-pin, universal
• Supply voltage: 18 ... 30 V
• Power consumption: ? 1.5 W
• Polarity inversion protection: ?
• MTTFd: time to dangerous failure: 240 years (EN ISO 13849-1)
• Mechanical design: Blind hollow shaft
• Shaft diameter: 8 mm
• Weight: 0.12 kg
• Material, shaft: Stainless steel
• Material, flange: Aluminum
• Material, housing: Zinc
• Starting torque: < 1 Ncm
• Operating torque: < 1 Ncm
• Permissible shaft movement, static: ± 0.3 mm (radial), ± 0.3 mm (axial),
• Permissible movement shaft, dynamic: ± 0.1 mm (radial), ± 0.1 mm (axial),
• Moment of inertia of the rotor: 15 gcmІ
• Bearing life: 2.0 x 10^9 revolutions
• Angular acceleration: ? 500.000 rad/sІ
• Operating speed: ? 6.000 min?№
• EMC: According to EN 61000-6- 2, EN 61000-6-3 and EN 61131-9
• Protection type: IP66 (IEC 60529), IP67 (IEC 60529),
• Permissible relative humidity: 90% ( No condensation allowed)
• Operating temperature range: –40 °C ... +85 °C
• Storage temperature range: –40 °C ... +100 °C , unpacked
• Shock resistance: 100 g, 6 ms (according to EN 60068-2-27)
• Vibration resistance: 20 g, 10 Hz ... 2.000 Hz (according to EN 60068- 2-6)
• Intellectual task designation: Length measurement and trigger
• Number of pulses per revolution: 16001 … 70000
• Mechanical design: blind hollow shaft
• Shaft diameter: 8 mm
• Category< /strong>:Absolute encoders
• Series:AHS/AHM36