Sick AHM36A-S3PC014x12 AHM36 Absolute encoder

Sick AHM36A-S3PC014x12
Item Number: AHM36A-S3PC014x12
  • Compact 36 mm absolute encoder with max. 26 bits (singleturn: 14 bits, multiturn: 12 bits)
  • Face mount flange, servo flange, blind hollow shaft
  • Rotatable M12 connector or rotatable cable outlet
444.31
Quantity
-
+
Total price: 444.31
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments

Specification:

Part Number1066007
Parameterising data:Number of revolutions (only Multiturn version), Code type, Position Errorbit, PRESET, Endless operating functionality (only Multiturn version), Number of steps per revolution, SSI mode, Verschiebung Positionsbits, Zählrichtung
Shaft diameter:6 mm
Mechanical interface:Solid shaft, Face mount flange
EMC:(according to EN 61000-6-2 and EN 61000-6-3)
Operating voltage range:4.5 V DC ... 32 V DC
MTTFd: mean time to dangerous failure:230 a (EN ISO 13849-1)
Permissible Load capacity of shaft:20 N (axial), 40 N (radial)
Storage temperature range:-40 °C ... +100 °C, without package
Shaft length:12 mm
Power consumption max. without load:1.5 W
CW/CCW (counting sequence when turning):L-active (L = 0 - 1 V, H = 2,0 - Us V)
Measuring step:± 0.022 ° (360 ° / number of steps)
Code sequence:CW/CCW
SET (electronic adjustment):H-active L = 0 - 3 V, H = 4.0 - Us V
Max. number of steps per revolution:16,384, number of steps from 1 to 16,384 programmable
Resolution power:16,384 x 4,096
Error limits:± 0.35 ° (at 20°C)
Enclosure rating:IP 66 / IP 67 (according to IEC 60529), housing side, IP 66 / IP 67 (according to IEC 60529), shaft side
Permissible relative humidity:90 % (Condensation not permitted)
Connection type:Male connector M12, 8-pin, universal
Operating torque:< 1 Ncm (+20 °C)
Mass:0.12 kg (for an encoder with connector outlet)
Repeat accuracy:± 0.2 ° (at 20°C)
Moment of inertia of the rotor:2.5 gcm²
Housing material:Zinc
Flange material:Aluminum
Interface signals:Clock +, Clock -, Data +, Data-
Code type:Binary, Gray
Resolution:14 bit x 12 bit
Max. number of revolutions:4,096, number of revolutions from 1 to 4,096 programmable
Electrical interface:SSI
Resistance to shocks:100 g, 6 ms (according to EN 60068-2-27)
Shaft material:Stainless steel
Resistance to vibration:20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
Initialization time:100 ms
Start up torque:1 Ncm (+20 °C)
Working temperature range:-40 °C ... +100 °C
Bearing lifetime:3.6 x 10^8 revolutions
Max. angular acceleration:500,000 rad/s²
Maximum operating speed:6,000 /min
Power consumption:Without load
Clock frequency:2 MHz
Reverse polarity protection:1

Comments

No comments yet

Write a comment