Sick ARS60-A4A01024 Parallel absolute encoder

Sick ARS60-A4A01024
Item Number: ARS60-A4A01024
  • Absolute singleturn encoder
  • Resolution: up to 15 bits (32,768 increments)
  • Electrical interface: SSI with gray code type or gray capped
Total price: 508.20
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments


Part Number1031397
Moment of inertia of the rotor:54 gcm²
Resistance to vibration:20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
Measuring step deviation:0.005 °, 0.016 °
Repeat accuracy:0.005 °
Shaft diameter:10 mm
Mechanical interface:Solid shaft, Face mount flange
EMC:According to EN 61000-6-2 and EN 61000-6-3
Operating power consumption (no load):60 mA
Max. angular acceleration:500,000 rad/s²
Resolution power:1,024 x 1
Working temperature range:-20 °C ... 85 °C
Max. number of revolutions:1
Enclosure rating:IP 65, according to IEC 60529, with mating connector fitted

Mass:0.3 kg
Bearing lifetime:3.6 x 10^9 revolutions
Measuring step:360 ° /number of lines
Error limits:0.035 ° (binary number of steps)
0.046 ° (non-binary number of steps)
Electrical interface:Connector M23, 12-pin, radial
Permissible relative humidity:90 % (condensation of the optical scanning not permitted)
Initialization time:80 ms
Operating torque:0.3 Ncm
Operation of zero-set:≥ 100 ms
Operating voltage range:10 V DC ... 32 V DC
Maximum operating speed:10,000 /min (without shaft seal)
6,000 /min (with shaft seal)
Resistance to shocks:50 g (according to EN 60068-2-27)
Max. number of steps per revolution:1,024
Storage temperature range:-40 °C ... 100 °C
Permissible Load capacity of shaft:20 N (radial)
10 N (axial)
Start up torque:0.4 Ncm
  • In accordance with DIN ISO 1319-1, position of the upper and lower error limit depends on the installation situation, specified value refers to a symmetrical position, i.e. deviation in upper and lower direction is the same.
  • In accordance with DIN ISO 55350-13; 68.3% of the measured values are inside the specified area.


No comments yet

Write a comment