Sick ATM60-A4L12X12 ATM60 Absolute encoder

Sick ATM60-A4L12X12
Item Number: ATM60-A4L12X12
  • Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
  • Mechanical interface: face mount flange, servo flange, blind hollow shaft and extensive adapter accessories
  • Zero-set and preset functions via hardware or software
661.14
Quantity
-
+
Total price: 661.14
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments

Specification:

Part Number1030003
Code type:Binary, Gray
Error limits:± 0.25 °
Electrical interface:SSI
Power consumption max. without load:0.8 W
Max. number of steps per revolution:4,096
Moment of inertia of the rotor:35 gcm²
CW/CCW (counting sequence when turning):L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V)
Enclosure rating:IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 65 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal
Mass:0.5 kg
Parameterising data:Number of revolutions, Code type, Electronic adjustment, Number of steps per revolution
Connection type:Cable, 12-pin, radial, 3 m
Operating torque with shaft seal:1.8 Ncm
Resolution:12 bit x 12 bit
Resistance to vibration:20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
Interface signals:Clock +, Clock -, Data +, Data-, Programming interface: RS-422
Repeat accuracy:0.1 °
Flange material:Aluminum
Clock frequency:1 MHz
Shaft length:19 mm
Operating torque without shaft seal:0.3 Ncm
Bearing lifetime:3.6 x 10^9 revolutions
Start up torque without shaft seal:0.5 Ncm
EMC:(according to EN 61000-6-2 and EN 61000-6-3)
Measuring step:0.043 °
Housing material:Die-cast aluminum
Start up torque with shaft seal:2.5 Ncm
SET (electronic adjustment):H-active (L &;8801; 0 - 4,7 V, H &;8801; 10 - Us V)
MTTFd: mean time to dangerous failure:150 a (EN ISO 13849-1)
Resistance to shocks:100 g, 6 ms (according to EN 60068-2-27)
Max. number of revolutions:4,096
Initialization time:1,050 ms
Code sequence:CW/CCW
Permissible relative humidity:98 %
Shaft material:Stainless steel
Permissible Load capacity of shaft:300 N (radial), 50 N (axial)
Working temperature range:-20 °C ... +85 °C
Storage temperature range:-40 °C ... +100 °C, without package
Operating voltage range:10 V ... 32 V
Mechanical interface:Solid shaft, Face mount flange
Resolution power:4,096 x 4,096
Shaft diameter:10 mm



Max. angular acceleration:500,000 rad/s²

Comments

No comments yet

Write a comment