Sick ATM60-A4M12X12
ATM60 Absolute encoder
- Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
- Mechanical interface: face mount flange, servo flange, blind hollow shaft and extensive adapter accessories
- Zero-set and preset functions via hardware or software
- Overview
- Comments
The product has been Discontinued by the Manufacturer!
Contact sales manager for a replacement.
Specification:
Part Number | 1030004 |
Shaft diameter: | 10 mm |
Interface signals: | Clock +, Clock -, Data +, Data-, Programming interface: RS-422 |
Mechanical interface: | Solid shaft, Face mount flange |
Operating torque with shaft seal: | 1.8 Ncm |
Resolution: | 12 bit x 12 bit |
Max. number of revolutions: | 4,096 |
Max. angular acceleration: | 500,000 rad/s² |
Start up torque with shaft seal: | 2.5 Ncm |
Measuring step: | 0.043 ° |
SET (electronic adjustment): | H-active (L &;8801; 0 - 4,7 V, H &;8801; 10 - Us V) |
Error limits: | ± 0.25 ° |
Bearing lifetime: | 3.6 x 10^9 revolutions |
Repeat accuracy: | 0.1 ° |
Shaft length: | 19 mm |
Shaft material: | Stainless steel |
Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) |
Housing material: | Die-cast aluminum |
Code type: | Binary, Gray |
MTTFd: mean time to dangerous failure: | 150 a (EN ISO 13849-1) |
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
Storage temperature range: | -40 °C ... +100 °C, without package |
Mass: | 0.5 kg |
Working temperature range: | -20 °C ... +85 °C |
Initialization time: | 1,050 ms |
Parameterising data: | Number of revolutions, Code type, Electronic adjustment, Number of steps per revolution |
CW/CCW (counting sequence when turning): | L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) |
Resolution power: | 4,096 x 4,096 |
Permissible Load capacity of shaft: | 300 N (radial), 50 N (axial) |
Electrical interface: | SSI |
Start up torque without shaft seal: | 0.5 Ncm |
Operating voltage range: | 10 V ... 32 V |
Connection type: | Cable, 12-pin, radial, 5 m |
Resistance to shocks: | 100 g, 6 ms (according to EN 60068-2-27) |
Code sequence: | CW/CCW |
Permissible relative humidity: | 98 % |
Enclosure rating: | IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 65 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal |
Flange material: | Aluminum |
Power consumption max. without load: | 0.8 W |
Operating torque without shaft seal: | 0.3 Ncm |
Max. number of steps per revolution: | 4,096 |
Clock frequency: | 1 MHz |
Moment of inertia of the rotor: | 35 gcm² |
People also buy
Comments
No comments yet