Sick ATM60-DAH13X13
ATM60 Absolute encoder
- Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
- Mechanical interface: face mount, servo flange, blind hollow shaft and adapter accessories
- Zero set and preset functions via hardware/software
Item Number:
ATM60-DAH13X13
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Specification:
| Part Number | 1030019 |
| MTTFd: mean time to dangerous failure: | 150 a (EN ISO 13849-1) |
| Data protocol: | DeviceNet Specification Release 2.0 |
| SET (electronic adjustment): | Via PRESET push button or protocol |
| Power consumption max.: | 2 W |
| Enclosure rating: | IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 66 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal |
| Storage temperature range: | -40 °C ... 125 °C, without package |
| Measuring step: | 0.043 ° |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
| Shaft diameter: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 " 3/8 " 1/2 " |
| Resolution power: | 8,192 x 8,192 |
| Bus interface: | ISO-DIS 11898 |
| Working temperature range: | -20 °C ... 85 °C |
| Status information: | Network status LED, 2-colours |
| Resistance to shocks: | 100 g (according to EN 60068-2-27) |
| Data transmission rate (baud rate): | 250 kBaud, 500 kBaud, DIP-switches or protocol / 125 kBaud |
| Bearing lifetime: | 3.6 x 10^9 revolutions |
| Housing material: | Die-cast aluminum |
| Mass: | 0.59 kg |
| Error limits: | ± 0.25 ° |
| Electrical interface: | Bus adaptor with cable screw fixings or connector |
| Resolution: | 13 bit x 13 bit |
| Operating torque with shaft seal: | 0.8 Ncm |
| Operating voltage range: | 10 V ... 32 V |
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) |
| Permissible relative humidity: | 98 % |
| Address setting: | 0 ... 63, DIP-switches or protocol |
| Permissible movement axial static/dynamic: | ± 0.5 mm, ± 0.2 mm |
| Repeat accuracy: | 0.1 ° |
| Bus termination: | DIP switch |
| Shaft material: | Stainless steel |
| Mechanical interface: | Blind hollow shaft |
| Bus: | DeviceNet |
| Max. number of revolutions: | 8,192 |
| Permissible movement radial static/dynamic: | ± 0.3 mm, ± 0.1 mm |
| Flange material: | Aluminum |
| Moment of inertia of the rotor: | 55 gcm² |
| Initialization time: | 1,250 ms |
| Max. number of steps per revolution: | 8,192 |
| Max. angular acceleration: | 500,000 rad/s² |
| Start up torque with shaft seal: | 1.2 Ncm |
People also buy
Comments
No comments yet