Sick BCG08-A1CM0318 Wire Draw (Rope) Encoders

Sick BCG08-A1CM0318
Item Number: BCG08-A1CM0318
  • Measuring lengths of 1.25 m, 3 m, 5 m, and 10 m.
  • Very small dimension (55 ... 190 mm)
  • Modular system: encoder type, measuring length, and interface can be selected
634.24
Quantity
-
+
Total price: 634.24
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments

Specification:

Part Number1054129
Measuring range:0 m ... 3 m
Hysteresis:≤ 0.4 mm
MTTFd: mean time to dangerous failure:250 a
Operating speed:4 m/s
Wire acceleration:10 m/s²
Mass (including encoder):510 g
Length of wire pulled out per revolution:230 mm
Encoder:Absolute encoders
Mounted encoder:AFM60 SSI
Enclosure rating mechanic:IP 50
Measuring wire material:Highly flexible stranded steel 1.4401 stainless steel V4A
Actual length of cable extension:3.2 m
Initialization time:Ca. 50 ms
Resistance to vibration:20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
Linearity:≤ ± 2 mm
Code type:Gray
Repeatability:≤ 0.2 mm
Enclosure rating encoder:IP 67
Supply voltage:4.5 V ... 32 V
Spring return force:Ca. 5 N ... ca. 6.3 N
Resolution (wire draw + encoder):0.06 mm
Part number encoder:1037649
Electrical interface:SSI
Mass (measuring wire):1.2 g/m
SET (electronic adjustment):Via SET cable
Number of steps per revolution:4,096
EMC:(according to EN 61000-6-2 and EN 61000-6-3)
Relative humidity / Condensation:90 % (condensation of the optical scanning not permitted)
Resistance to shocks:50 g, 6 ms (according to EN 60068-2-27)
Clock frequency:1 MHz
2 MHz
Connection type:Male connector M12, 8-pin, radial
Mounted mechanic:MRA-G080-103D3
Mass (mechanics):250 g
Measuring wire diameter:0.55 mm
Life of wire draw mechanism:1 million cycles
Housing material, wire draw mechanism:Plastic, Noryl
Power consumption:0.7 W
Working temperature range (encoder):-30 °C ... +70 °C, with AFM60B, 0 °C ... +70 °C, with AFM60E
Part number mechanic:5322778
Working temperature range (combination):Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik
Working temperature range (mechanics):-30 °C ... +70 °C

Comments

No comments yet

Write a comment