Sick BTF08-N1BM0399 Wire Draw (Rope) Encoders

Sick BTF08-N1BM0399
Item Number: BTF08-N1BM0399
  • Absolute wire draw encoders
  • Modular measuring system with a wide selection of interfaces/measuring lengths
  • Measuring lengths: 2 m ... 50 m
Total price: 1277.90
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments


Part Number1060976
Electrical interface:PROFINET
Measuring wire material:Highly flexible stranded steel 1.4401 stainless steel V4A
Working temperature range (encoder):-30 °C ... +70 °C
Encoder:Absolute encoders
Initialization time:Ca. 12 s
Housing material, wire draw mechanism:Aluminum (anodised), die-cast zinc
Working temperature range (mechanics):-30 °C ... +70 °C
Mass (mechanics):1.5 kg
Spring return force:6 N ... 14 N
Protocol:PROFINET IO/ RT Class B
Part number mechanic:6030125
Part number encoder:1059040
Power consumption:3 W
Relative humidity / Condensation:90 % (condensation of the optical scanning not permitted)
Repeatability:≤ 1 mm
Number of steps per revolution:262,144
Enclosure rating mechanic:IP 64
Enclosure rating encoder:IP 67
Actual length of cable extension:3.2 m
Address setting:Via DCP
SET (electronic adjustment):Via PRESET push button or protocol
Resistance to shocks:100 g, 6 ms (according to EN 60068-2-27)
EMC:(according to EN 61000-6-2 and EN 61000-6-3)
Length of wire pulled out per revolution:200 mm
Measuring wire diameter:1.35 mm
Life of wire draw mechanism:1 million cycles
Working temperature range (combination):Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik
Mounted encoder:AFM60 PROFINET
Resolution (wire draw + encoder):0.001 mm
Mounted mechanic:MRA-F080-103D2
Resistance to vibration:30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
Mass (measuring wire):7.1 g/m
Supply voltage:10 V ... 30 V
Hysteresis:≤ 2 mm
Measuring range:0 m ... 3 m
Linearity:≤ ± 2 mm
MTTFd: mean time to dangerous failure:80 a
Mass (including encoder):1.7 kg
Connection type:Connector 3 x M12, 4-pin, axial
Encoder profile:V4.1 class3
Wire acceleration:40 m/s²
Operating speed:4 m/s


No comments yet

Write a comment