Sick BTF13-P1BM2025 Wire Draw (Rope) Encoders

Sick BTF13-P1BM2025
Item Number: BTF13-P1BM2025
  • Absolute wire draw encoders
  • Modular measuring system with a wide selection of interfaces/measuring lengths
  • Measuring lengths: 2 m ... 50 m
1657.32
Quantity
-
+
Total price: 1657.32
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments

Specification:

Part Number1060997
Mounted mechanic:MRA-F130-120D1
Relative humidity / Condensation:95 % (A3M60, condensation of the optical scanning not permitted), 98 % (ATM60 PROFIBUS, condensation of the optical scanning not permitted)
Part number encoder:1051018
Wire acceleration:30 m/s²
Working temperature range (mechanics):-30 °C ... +70 °C
Housing material, wire draw mechanism:Aluminum (anodised), plastic
Mass (measuring wire):2.6 g/m
Power consumption:1.5 W (A3M60), 2 W (ATM60 PROFIBUS)
Enclosure rating mechanic:IP 64
Encoder:Absolute encoders
Part number mechanic:6028628
Measuring wire material:Highly flexible stranded steel 1.4401 stainless steel V4A
Supply voltage:10 V ... 32 V
Enclosure rating encoder:IP 67
Connection type:Connector 3 x M12, 5-pin, axial
Spring return force:10 N ... 20 N
Working temperature range (encoder):-10 °C ... +70 °C, A3M60, -20 °C ... +70 °C, ATM60 PROFIBUS
Electrical interface:PROFIBUS
EMC:(according to EN 61000-6-2 and EN 61000-6-3)
Mass (mechanics):5 kg
Operating speed:4 m/s
Life of wire draw mechanism:1 million cycles
MTTFd: mean time to dangerous failure:150 a (ATM60 PROFIBUS), 60 a (A3M60)
Actual length of cable extension:20.2 m
Address setting:0 ... 127, DIP switch
Measuring range:0 m ... 20 m
Mass (including encoder):5.28 kg (A3M60), 5.59 kg (A3M60)
Encoder profile:Encoder profile version 1.1 class 1 and class 2 (A3M60), Profil für Encoder (07hex) - Class 2 (ATM60 PROFIBUS)
Resistance to shocks:100 g, 6 ms (according to EN 60068-2-27)
Bus termination:Via DIP switches
Initialization time:Ca. 1 s, A3M60, Ca. 12 s, ATM60 PROFIBUS
Resistance to vibration:30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
Measuring wire diameter:0.81 mm
Number of steps per revolution:8,192
Repeatability:≤ 2 mm
Mounted encoder:A3M60, ATM60 PROFIBUS
Linearity:≤ ± 2 mm
Working temperature range (combination):Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik
Length of wire pulled out per revolution:332.4 mm
Hysteresis:≤ 5 mm
Protocol:PROFIBUS DP V0 (A3M60), Profil für Encoder (07hex) - Class 2 (ATM60 PROFIBUS)
SET (electronic adjustment):Via PRESET push button or protocol
Resolution (wire draw + encoder):0.04 mm

Comments

No comments yet

Write a comment