Sick CM30-25NAP-KW1

Capacitive Sensor

Sick CM30-25NAP-KW1

Datasheet:

• Article: 6028413
• Case type: Cylindrical with thread
• Thread size: M30 x 1.5
• Diameter: Ш 30 mm
• Sensing distance S_n: 4 mm ... 25 mm
• Sensing distance ensured S_a: 18 mm
• Mounting: With projecting part
• Switching frequency: 10 Hz
• Connection type: Cable, 2-wire, 2 m
• Output function: Normal closed or normally open
• Electrical version: AC. current, 2-wire
• Setting: Potentiometer (Sensitivity)
• Protection type: IP67
• Supply voltage: 20 V AC ... 250 V AC
• Residual ripple: ? 10%
• Voltage drop: ? 10 V DC
• Current consumption: 10 mA
• Ready delay: ? 100 ms
• Hysteresis: 4% ... 20%
• Reproducibility: ? 5%
• Temperature deviation (from S_r): ± 10%
• EMC: According to EN 60947-5-2
• DC current I_a: ? 500 mA
• Cable material : PVC
• Cable cross-section: 0.5 mmІ
• Polarity inversion protection: ?
• Switch-on impulse suppression: ?
• Shock resistance and vibration resistance: 30 g, 11 ms/10...55 Hz, 1 mm
• Temperature range during operation: –25 °C ... +80 °C
• Case material: Plastic , PBT
• Body length: 75.6 mm
• Usable thread length: 50 mm
• Max. tightening torque: ? 7.5 Nm
• Supply set: Fastening nut, plastic PA12 (2 pcs.), Screwdriver for adjusting the potentiometer (1 pc.),
• MTTF _D: 815 years
• DC_avg: 0%
• T_M (set operating time): 20 years
• Note: Values are indicative and subject to change
• Metal: 1
• Water: 1
• PVC: Approx. 0.4
• Oil: Approx. 0.25
• Glass: 0.6
• Ceramics: 0.5
• Alcohol: 0.7
• Wood industry: 0 .2 ... 0.7
• Note: For relevant graphic materials, see section. “Installation instructions”
• A: 30 mm
• B: 60 mm
• C: 30 mm
• D: 75 mm
• E: 14.5 mm, In case of use in critical conditions, the sensor must be pre-tested
• Series:CM
• Sensing distance:4 … 25 mm
• Output signal function:NO / NC