Sick DBS36E-S3EM00360 DBS36 Incremental encoder

Sick DBS36E-S3EM00360
Item Number: DBS36E-S3EM00360
  • Connection with universal cable outlet
  • Versions with blind hollow shaft or face mount flange with solid shaft
  • Face mount flange with 3 mounting hole patterns and servo groove
Total price: 89.54
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments


Part Number1062696
Working temperature range:-20 °C ... +85 °C
Shaft material:Stainless steel
Reference signal, number:1
Operating voltage range:7 V ... 30 V
Start up torque:0.5 Ncm (+20 °C)
Operating speed:6,000 /min
EMC:(according to EN 61000-6-2 and EN 61000-6-4 (class A))
Reference signal, position:90 °, electronically, gated with A and B
Maximum output frequency:300 kHz
Enclosure rating:IP 65
Reverse polarity protection:1
Duty cycle:≤ 0.5 ± 5 %
Error limits:± 54 ° (/pulses per revolution)
Flange material:Aluminum
Material, cable:PVC
Permissible shaft loading radial/axial:20 N (axial), 40 N (radial)
Shaft diameter:6 mm x 12 mm
Storage temperature range:-40 °C ... +100 °C, without package
Load current max.:30 mA
Measuring step:90 ° / electronically/pulses
Operating power consumption (no load):50 mA
Electrical interface:7 V ... 30 V, HTL/Push pull
Mechanical interface:Solid shaft, Face mount flange
Moment of inertia of the rotor:0.6 gcm²
Permissible relative humidity:90 % (condensation of the optical scanning not permitted)
Short-circuit protection of the outputs:1
Housing material:Aluminum
Resistance to shocks:100 g (EN 60068-2-27)
Connection type:Cable, 8-wire, universal, 5 m
Measuring step deviation:± 18 ° / impulses per relovution
Resistance to vibration:20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
Power consumption max. without load:Without load
Pulses per revolution:360
Max. angular acceleration:500,000 rad/s²
MTTFd: mean time to dangerous failure:600 a (EN ISO 13849-1)
Initialization time:< 3 ms
Operating torque:0.4 Ncm (+20 °C)
Bearing lifetime:2 x 10^9 revolutions
Maximum operating speed:8,000 U/min


No comments yet

Write a comment