Sick DBS50E-S5AM01000

Incremental Encoder

Sick DBS50E-S5AM01000

Datasheet:

• Article: 1062127
• Number of pulses per revolution: 1,000
• Measuring step: 90° electrical/pulses per revolution
• Measuring deviation steps: ± 18° /pulses per revolution
• Tolerances: ± 54° /pulses per revolution
• Load cycle: ? 0.5 ± 5%
• Communication interface: Incremental
• Communication interface, detailed description: TTL / RS-422
• Number of signal channels: 6 channels
• Initialization time: < 3 ms
• Output frequency: ? 300 kHz
• Load current: ? 30 mA
• Operating current: ? 50 mA (no load)
• Type of connection: Cable, 8 cores, universal, 5 m
• Supply voltage: 4.5 ... 5.5 V
• Base signal, quantity: 1
• Basic signal, position: 90°, electrical, logical connections to A and B
• Output short-circuit resistance: ?
• MTTFd: time to dangerous failure: 600 years (EN ISO 13849-1)
• Mechanical design: Solid shaft, End flange
• Shaft diameter: 8 mm
• Shaft length: 15.5 mm
• Weight: + 180 g (with connecting cable)
• Material, shaft: Stainless steel
• Material, flange: Aluminum
• Material, housing : Aluminum
• Material, cable: PVC
• Starting torque: + 0.9 Ncm (+20 °C)
• Operating torque: 0.6 Ncm (+20 °C)
• Shaft load capacity, radial/axial: 30 N (axial), 50 N (radial),
• Operating speed: 6,000 min?№
• Maximum operating speed: 8.000 min?№
• Moment of inertia of the rotor: 0.65 gcmІ
• Bearing life: 2 x 10^9 revolutions
• Angular acceleration: ? 500,000 rad/sІ
• EMC: According to EN 61000-6-2 and EN 61000-6-3 (class A)
• Protection type: IP65
• Permissible relative air humidity: 90% (Formation of condensation on optical scanning elements is not allowed)
• Operating temperature range: –20 °C ... +85 °C, –35 ° C ... +95 °C on request
• Storage temperature range: –40 °C ... +100 °C, unpacked
• Shock resistance: 100 g, 6 ms (EN 60068-2-27)
• Vibration resistance: 20 g, 10 Hz ... 2.000 Hz (EN 60068-2-6)
• Category: Incremental encoders
• Series: DBS50 Core
• Number of pulses per revolution: 501 … 1000
• Mechanical design: solid shaft/end flange
• Shaft diameter: 8 mm