Sick DBS50E-S5GK00500

Incremental Encoder

Sick DBS50E-S5GK00500

Datasheet:

• Article: 1077826
• Number of pulses per revolution: 500
• Measuring step: 90° electrical/pulses per revolution
• Measuring deviation steps: ± 18° /pulses per revolution
• Tolerances: ± 54° /pulses per revolution
• Load cycle: ? 0.5 ± 5%
• Communication interface: Incremental
• Communication interface, detailed description: HTL / Push pull
• Number of signal channels: 3 channels
• Initialization time: < 3 ms
• Output frequency: ? 300 kHz
• Load current: ? 30 mA
• Power consumption: < 0.5 W (no load)
• Type of connection: Cable, 5 cores, universal, 1.5 m
• Supply voltage: 7 ... 27 V
• Base signal, quantity: 1
• Basic signal, position: 90°, electrical, logical connections to A and B
• Polarity inversion protection: ?
• Output short circuit resistance: ?
• MTTFd: time to dangerous failure: 600 years (EN ISO 13849-1)
• Mechanical design: Solid shaft, end flange
• Shaft diameter: 8 mm
• Shaft length: 15.5 mm
• Weight: + 180 g (with connecting cable)
• Material, shaft: Stainless steel
• Material, flange : Aluminum
• Material, housing: Aluminum
• Material, cable: PVC
• Starting torque: + 0.9 Ncm (+20 °C)
• Operating torque: 0.6 Ncm (+20 °C)
• Shaft load capacity, radial/axial: 30 N (axial), 50 N (radial),
• Operating speed: 6,000 min?№
• Maximum operating speed: 8,000 min?№
• Moment of inertia of the rotor: 0.65 gcmІ
• Life bearing service: 2 x 10^9 revolutions
• Angular acceleration: ? 500,000 rad/sІ
• EMC: According to EN 61000-6-2 and EN 61000-6-3 (class A )
• Protection type: IP65
• Permissible relative air humidity: 90% (Formation of condensation on optical scanning elements is not allowed)
• Operating temperature range: –20 ° C ... +70 °C
• Storage temperature range: –40 °C ... +100 °C, unpacked
• Shock resistance: 100 g, 6 ms (EN 60068-2-27)
• Vibration resistance: 20 g, 10 Hz ... 2.000 Hz (EN 60068-2-6)
• Category: Incremental encoders
• Series: DBS50 Core
• Number of pulses per revolution: 101 … 500
• Mechanical design: solid shaft/end flange
• Shaft diameter: 8 mm