Sick DBS60E-S4CA05000

Incremental Encoder

Sick DBS60E-S4CA05000

Datasheet:

• Article: 1075365
• Number of pulses per revolution: 5,000
• Measuring step: ? 90° electrical/pulses per revolution
• Deviation measuring steps: ± 36° /pulses per revolution
• Tolerances: Deviation of measuring step x 3
• Load cycle: ? 0.5 ± 10%
• Interface communications: Incremental
• Communication interface, detailed description: TTL / RS-422
• Number of signal channels: 6 channels
• Initialization time: < 5 ms
• Output signal frequency: + 300 kHz
• Load current: ? 30 mA, per channel
• Power consumption: ? 0.5 W (no load)
• Connection type: Connector, M23, 12-pin, radial
• Supply voltage: 10 ... 30 V
• Base signal, quantity: 1
• Basic signal, position: 90°, electrical, logical connections to A and B
• Polarity inversion protection: ?
• Output short circuit resistance: ?
• MTTFd: time to dangerous failure: 500 years (EN ISO 13849-1)
• Mechanical design: Solid shaft, end flange
• Shaft diameter: 10 mm
• Shaft length: 19 mm
• Flange type / stator coupling: Flange with 3 M3 and 3 M4 connectors
• Weight: + 0.3 kg
• Material, shaft: Stainless steel
• Material, flange: Aluminum
• Material, housing: Aluminum
• Starting torque: + 1.2 Ncm (+20 °C)
• Operating torque: 1.1 Ncm (+20 °C)
• Shaft load capacity, radial/axial: 100 N (radial), 50 N (axial ) ,
• Operating speed: 6,000 min?№
• Maximum operating speed: 9,000 min?№
• Moment of inertia of the rotor: 33 gcmІ
• Bearing life: 3.6 x 10⁹ revolutions
• Angular acceleration: ? 500,000 rad/sІ
• EMC: According to EN 61000-6 -2 and EN 61000-6-3
• Protection type: IP67, housing side (according to IEC 60529), IP65, shaft side (according to IEC 60529),
• Permissible relative air humidity: 90% (Formation of condensation on optical scanning elements is not allowed)
• Operating temperature range: –30 °C ... +85 °C, more than 3,000 pulses per revolution
• li>Storage temperature range: –40 °C ... +100 °C, unpacked
• Shock resistance: 250 g, 3 ms (according to EN 60068-2-27)
• Vibration resistance: 30 g, 10 Hz ... 2.000 Hz (according to EN 60068-2-6)
• Category: Incremental encoders
• Series: DBS60 Core
• Number of pulses per revolution: 2501 … 5000
• Mechanical design :solid shaft/end flange
• Shaft diameter: 10 mm