Sick DBS60E-S4EA00100
DBS60 Incremental encoder
- Face mount flange, servo flange, blind and through hollow shaft
- Housing unit: ?58 mm; compact mounting depth, large bearing distance
- Flange and stator couplings enable diverse mounting options
Item Number:
DBS60E-S4EA00100
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Sick DBS60E-S4EA00100 is outdated.
Specification:
| Part Number | DBS60E-S4EA00100 |
| Resistance to shocks: | 250 g, 3 ms (according to EN 60068-2-27) |
| Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) |
| Output current: | ≤ 30 mA, per channel |
| Bearing lifetime: | 3.6 x 10^9 revolutions |
| Duty cycle: | ≤ 0.5 ± 5 % |
| Mass: | 0.3 kg |
| Permissible shaft loading radial/axial: | 100 N (radial), 50 N (axial) |
| Maximum output frequency: | 300 kHz |
| Measuring step: | 90 ° / electronically/pulses per revolution |
| Working temperature range: | -20 °C ... +85 °C |
| Mechanical interface: | Solid shaft, Face mount flange |
| Connection type: | Connector M23, 12-pin, radial |
| Shaft material: | Stainless steel |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
| Max. angular acceleration: | 500,000 rad/s? |
| Error limits: | Measuring step deviation x 3 |
| Moment of inertia of the rotor: | 33 gcm? |
| MTTFd: mean time to dangerous failure: | 500 a (EN ISO 13849-1) |
| Reference signal, position: | 90 °, electronically, gated with A and B |
| Operating speed: | 6,000 /min |
| Housing material: | Aluminum |
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
| Power consumption max. without load: | ≤ 1 W |
| Maximum operating speed: | 9,000 /min |
| Pulses per revolution: | 100 |
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side |
| Flange material: | Aluminum |
| Shaft diameter: | 10 mm x 19 mm |
| Storage temperature range: | -40 °C ... +100 °C, without package |
| Operating torque: | 1.1 Ncm (+20 °C) |
| Initialization time: | < 5 ms |
| Measuring step deviation: | ± 18 ° / impulses per relovution |
| Short-circuit protection of the outputs: | 1 |
| Electrical interface: | 10 V ... 27 V, HTL/Push pull |
| Reference signal, number: | 1 |
| Reverse polarity protection: | 1 |
| Start up torque: | 1.2 Ncm (+20 °C) |
Comments
No comments yet