Sick DFS60A-TGCA65536

Incremental Encoder

Sick DFS60A-TGCA65536

Datasheet:

• Article: 1078704
• Number of pulses per revolution: 65.536
• Measuring step: 90° electrical/pulses per revolution
• Measurement deviation pitch at binary resolution: ± 0.0015°
• Tolerances: ± 0.03°
• Communication interface: Incremental
• Communication interface, detailed description: TTL / RS-422
• Number of signal channels: 6 channels
• Initialization time: 40 ms
• Output signal frequency: ? 820 kHz
• Current load: ? 30 mA
• Power consumption: ? 0.5 W (no load)
• Connection type: Connector, M23, 12-pin, radial
• Supply voltage: 10 ... 32 V
• Basic signal, quantity: 1
• Basic signal, position: 90°, electrical, logical connections to A and B
• li>Polarity inversion protection: ?
• Output short-circuit resistance: ?
• MTTFd: time to dangerous failure: 300 years (EN ISO 13849-1)
• Mechanical design: Through hollow shaft
• Shaft diameter: 14 mm
• Weight: + 0.2 kg
• Material, shaft: Stainless steel
• Material, flange: Aluminum
• Material, housing: Die-cast aluminum
• Starting torque: 0.8 Ncm (+20 °C)
• Operating torque: 0.6 Ncm (+20 °C)
• Permissible shaft movement axial, static/dynamic: ± 0.5 mm / ± 0.01 mm
• Permissible shaft movement radial, static/dynamic: ± 0.3 mm / ± 0.05 mm
• Operating speed: ? 6.000 min?¹-
• Moment of inertia of the rotor: 40 gcmІ
• Bearing life: 3.6 x 10^10 revolutions
• Angular acceleration: ? 500,000 rad/sІ
• EMC: According to EN 61000-6-2 and EN 61000-6-4
• Protection type: IP65, housing side, plug (according to IEC 60529), IP65, shaft side (according to IEC 60529),
• Permissible relative humidity air: 90% (Formation of condensation on optical scanning elements is not allowed)
• Operating temperature range: –40 °C ... +100 °C, –30 °C ... +100 °C,
• Storage temperature range: –40 °C ... +100 °C, unpacked
• Shock resistance: 100 g, 6 ms (according to EN 60068-2-27)
• Vibration resistance: 30 g, 10 Hz ... 2.000 Hz (according to EN 60068-2-6)
• Category: Incremental encoders
• Series: DFS60
• Number of pulses per revolution: 16001 … 70000
• Mechanical design: through hollow shaft
• Shaft diameter: 14 mm