Sick DFS60B-BDPC10000
DFS60 Incremental Encoder
- Compact installation depth
- High resolution up to 16 bits
- Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses
Item Number:
DFS60B-BDPC10000
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Specification:
Part Number | 1036775 |
Start up torque: | 0.8 Ncm (+20 °C) |
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side |
Resistance to shocks: | 70 g (according to EN 60068-2-27) |
Operating torque: | 0.6 Ncm (+20 °C) |
Error limits: | ± 0.05 ° |
Moment of inertia of the rotor: | 40 gcm? |
Working temperature range: | -30 °C ... +100 °C |
Measuring step: | 90 ° / electronically/number of lines |
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
Maximum output frequency: | 600 kHz |
Reference signal, position: | 90 °, electronically, gated with A and B |
Mass: | 0.2 kg |
Electrical interface: | 4.5 V ... 32 V, TTL/HTL programmable, Connector M12, 8-pin, radial |
Maximum operating speed: | 6,000 /min |
Initialization time: | 30 ms, 32 ms |
Mechanical interface: | Blind hollow shaft |
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) |
MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) |
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
Pulses per revolution: | 10,000 |
Operating voltage range: | 4.5 V ... 32 V |
Permissible movement radial static/dynamic: | ± 0.3 mm, ± 0.1 mm |
Shaft material: | Metal |
Connection type: | Male connector M12, 8-pin, radial |
Permissible movement axial static/dynamic: | ± 0.5 mm, ± 0.2 mm |
Load current max.: | 30 mA |
Reference signal, number: | 1 |
Max. angular acceleration: | 500,000 rad/s? |
Power consumption: | 0.7 W (without load) |
Storage temperature range: | -40 °C ... +100 °C, without package |
Shaft diameter: | 10 mm |
Bearing lifetime: | 3.6 x 10^10 revolutions |
People also buy
Comments
No comments yet