Sick DFS60B-S1EK08192

Incremental Encoder

Sick DFS60B-S1EK08192

Datasheet:

• Article: 1056146
• Number of pulses per revolution: 8.192
• Measuring step: 90° electrical/pulses per revolution
• Measurement deviation pitch at binary resolution: ± 0.008°
• Tolerances: ± 0.05°
• Communication interface: Incremental
• Communication interface, detailed description: HTL / Push pull
• Number of signal channels: 6 channels
• Initialization time: 40 ms
• Output signal frequency: ? 600 kHz
• Load current: ? 30 mA
• Power consumption: ? 0.5 W (no load)
• Connection type: Cable, 8 cores, universal, 1.5 m
• Voltage supply: 10 ... 32 V
• Basic signal, quantity: 1
• Basic signal, position: 90°, electrical, logical connections to A and B
• Polarity inversion protection: ?
• Output short-circuit resistance: ?
• MTTFd: time to dangerous failure: 300 years (EN ISO 13849-1)
• Mechanical version: Solid shaft, Servo flange
• Shaft diameter: 6 mm
• Shaft length: 10 mm
• Weight: + 0.3 kg
• Material, shaft: Stainless steel
• Material, flange: Aluminum
• Material, housing: Aluminum casting
• Starting torque: 0.5 Ncm (+20 °C)
• Operating torque: 0.3 Ncm (+20 °C)
• Shaft load capacity, radial/axial: 80 N (radial), 40 N (axial),
• Operating speed: ? 9.000 min?¹-
• Moment of inertia of the rotor: 6.2 gcmІ
• Bearing service life: 3, 6 x 10^10 revolutions
• Angular acceleration: ? 500.000 rad/sІ
• EMC: According to EN 61000-6-2 and EN 61000-6-4
• Type of protection: IP67, cable outlet on the housing side (according to IEC 60529), IP65, on the shaft side (according to IEC 60529),
• Permissible relative humidity: 90% (Condensation does not form on the optical scanning elements allowed)
• Operating temperature range: –40 °C ... +100 °C, –30 °C ... +100 °C,
• Storage temperature range: – 40 °C ... +100 °C, unpacked
• Shock resistance: 70 g, 6 ms (according to EN 60068-2-27)
• Vibration resistance: 30 g, 10 Hz ... 2.000 Hz (according to EN 60068-2-6)
• Category: Incremental encoders
• Series :DFS60
• Number of pulses per revolution: 5001 … 16000
• Mechanical design: solid shaft/servo flange
• Shaft diameter: 6 mm