Sick DFS60B-S4NC01024
DFS60 Incremental Encoder
- Compact installation depth
- High resolution up to 16 bits
- Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses
Item Number:
DFS60B-S4NC01024
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Specification:
Part Number | 1065245 |
Working temperature range: | -30 °C ... +100 °C |
Signal offset: | 2.5 V ± 10 % |
Resistance to vibration: | 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) |
Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
Connection type: | Male connector M12, 8-pin, radial |
Shaft diameter: | 10 mm x 19 mm |
Max. angular acceleration: | 500,000 rad/s? |
Power consumption: | Without load |
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
Measuring step: | Electronically/number of lines |
Bearing lifetime: | 3.6 x 10^10 revolutions |
Reference signal, number: | 1 |
Mass: | 0.3 kg |
Signal before differential generation: | 0.5 V, ± 20 % |
Operating torque: | 0.3 Ncm (+20 °C) |
Maximum operating speed: | 10,000 /min |
Start up torque: | 0.5 Ncm (+20 °C) |
Operating voltage range: | 4.5 V ... 5.5 V |
MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) |
Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side |
Pulses per revolution: | 1,024 |
Storage temperature range: | -40 °C ... +100 °C, without package |
Interface signals: | Process data channel SIN, SIN_, COS, COS_: analog, differential, Process data channel Z, Z_: digital differential |
Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) |
Reference signal, position: | 90 °, electronically, gated with Sin. and Cos. |
Moment of inertia of the rotor: | 6.2 gcm? |
Resistance to shocks: | 70 g (according to EN 60068-2-27) |
Maximum output frequency: | 200 kHz |
Electrical interface: | 4.5 V ... 5.5 V, Sinus 1.0 VPP, Connector M12, 8-pin, radial |
Mechanical interface: | Solid shaft, Face mount flange |
Measuring step deviation: | ± 0.01 ° |
Error limits: | ± 0.05 ° |
People also buy
Comments
No comments yet