Sick DKS40-E5J01000
DKS40 Incremental encoder
- Compact housing
- Durable, low-cost design
- Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
- Overview
- Comments
The product has been Discontinued by the Manufacturer!
Contact sales manager for a replacement.
Specification:
| Part Number | 1034658 |
| Measuring step: | 90 °, Number of lines |
| Maximum output frequency: | 200 kHz |
| Max. angular acceleration: | 3,6 x 10^9 rad/s? |
| Reference signal, position: | 90 °, electronically, gated with A and B |
| EMC: | EN 61000-6-2, EN 61000-6-3 |
| Permissible shaft loading radial/axial: | 40 N, 20 N |
| Start up torque: | 0.6 Ncm (+20 °C) |
| Storage temperature range: | -40 °C ... +70 °C, without package |
| Connection type: | Cable, universal, 0.5 m |
| Pulses per revolution: | 1,000 |
| Operating torque: | 0.4 Ncm (+20 °C) |
| Measuring step deviation at non binary number of lines: | 0.07 ° |
| Reference signal, number: | 1 |
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6) |
| Moment of inertia of the rotor: | 6 gcm? |
| Mass: | 0.18 kg |
| Air humidity: | 90 % |
| Error limits non-binary number of lines: | 0.13 ° |
| Protection class shaft side: | IP 64 |
| Bearing lifetime: | 2 x 10^9 revolutions |
| Initialization time: | 40 s |
| Supply voltage: | 10 V ... 30 V |
| Protection class standard: | IEC 60529 |
| Error limits binary number of lines: | 0.09 ° |
| Working temperature range: | 0 °C ... +60 °C |
| Resistance to shocks: | 50 g, 7 ms (EN 60068-2-27) |
| Shaft diameter: | 8 mm x 13 mm |
| Mechanical interface: | Solid shaft, Face mount flange |
| Protection class housing side with cable outlet: | IP 64 |
| Operating power consumption (no load): | 40 mA |
| Electrical interface: | 10 V ... 30 V, HTL/Push pull, Cable, universal, 0.5 m |
| Maximum operating speed: | 6,000 U/min |
| Measuring step deviation at binary number of lines: | 0.035 ° |
| MTTFd: mean time to dangerous failure: | 600 a (EN ISO 13849-1) |
| Output current: | 30 mA |
People also buy
Comments
No comments yet