Sick DL100-23AB2103

Long range distance sensor

Sick DL100-23AB2103

Datasheet:

• Article: 1060950
• Supply voltage U_V: DC. current 18 V ... 30 V, Limit values
• Residual ripple: 5 V_ss
• Initialization time: Typ. 1.5 s
• Housing material: Metal (Aluminium casting)
• Front window material: Plastic (PMMA)
• Connection type: Connector, M12 compatible, SPEEDCON
• Indication: 6-digit 5 x 7 dot matrix display, LEDs
• Weight: Approx. 800 g (with mounting: 1600 g)
• Current consumption: At 24 V DC < 250 mA
• Dimensions (W x H x D): 69.4 mm x 82.5 mm x 100.2 mm
• Modulation frequency: Adjustable
• Protection type: IP65
• Protection class: III
• Measurement range: 0 ,15 m ... 300 m, on Diamond Grade reflective film
• Measurement object: Reflector
• Resolution: 0.1 mm, 0.125 mm, 1 mm, 10 mm, 100 mm
• Reproduction accuracy: 2 mm
• Accuracy: ± 3 mm
• Evaluation: 2 ms
• Measurement cycle time: 1 ms
• Output Time: 1 ms
• RADIATION SOURCE: Laser, Red, Visible Red
• Laser Class: 2, Complies with 21 CFR 1040.10 and 1040.11, excluding differences according to "Laser Notice No. 50" dated June 24, 2007 (IEC 60825-1:2014, EN 60825-1:2014)
• Typ. light spot size (distance): 5 mm + (2 mm x distance in m)
• Max. travel speed: 15 m/s
• Acceleration (max.): ? 15 m/sІ
• Serial: ? , RS-422
• Multifunction input (MF ): 1 x MF1
• Electromagnetic compatibility (EMC): EN 61000-6-2, EN 61000-6-4
• Operating temperature range: –20 °C ... + 55 °C, –20 °C ... +75 °C, Operation with cooling case,
• Storage temperature range: –40 °C ... +75 °C
• Influence of air pressure: 0.3 ppm/hPa
• Influence of temperature: 1 ppm/K
• Temperature drift: Typ. 0.1 mm/K
• Typ. Immunity to extraneous light: ? 100.000 lx
• Mechanical strength: Impact: (EN 600 68-2-27), Sine: (EN 600 68-2-6), Noise: (EN 600 68-2 -64),
• Quantity: 2
• Type: Push-pull mode: PNP/NPN
• Function: Distance: switching output for distance
• : Speed: output for speed
• : Maintenance: warning messages about laser aging, when the attenuation value does not reach the required value (for example, when dirty, when the permissible internal temperature of the device is exceeded or under-reached, when the plausibility of the measured value is incorrect, if the laser is not ready for operation, when heating is turned on
• : Laser off
• : Preset
• Maximum output current I_A: ? 100 mA
• Category:Long range distance sensors
• Series:Dx100