Sick DL1000-S11110

Long range distance sensor

Sick DL1000-S11110

Datasheet:

• Article: 1100075
• Supply voltage U_V: DC. current 18 V ... 30 V, with polarity inversion protection
• Residual ripple: ? 5 V_ss
• Power consumption: ? 22 W, s heating off, ? 35 W, heating on,
• Initialization time: > 30 s
• Case material: Metal (aluminum alloy (AlSi12))
• Material front window: Glass
• Connection type: Round plug connector M12 x 1
• Indication: Graphic, resistive touch screen, status LEDs
• Weight: 1,000 g
• Dimensions (W x H x D): 84 mm x 104.4 mm x 140.5 mm
• Protection type: IP65, IP67,
• Protection class: III (EN 61140)
• Measuring principle: HDDM⁺
• Measuring range: 0.2 m ... 1,500 m, on Diamond Grade reflective film
• Measurement object: Reflector
• Resolution: 0.001 mm ... 100 mm, adjustable
• Reproduction accuracy: ? 1 mm, see graphic characteristics for repeatability stability
• Accuracy: Typ. ± 15 mm, see measurement accuracy chart
• Rating: 3 ms ... 384 ms
• Measurement cycle times: 1 ms, 4 ms, 16 ms,
• Output time: ? 1 ms
• RADIATION SOURCE: Infrared light (905 nm, measuring laser), Visible red light (650 nm, adjustment aid),
• Laser class: 1, including simultaneous operation of the measuring and alignment laser (IEC 60825-1:2014, EN 60825-1:2014)
• Typ. light spot size (distance): 5 mm x 20 mm (at 1 m), 20 mm x 20 mm (at 5 m), 35 mm x 25 mm (at 10 m), 150 mm x 50 mm (at 50 m) , 290 mm x 80 mm (at a distance of 100 m), 570 mm x 140 mm (at a distance of 200 m), 4,200 mm x 920 mm (at a distance of 1,500 m),
• Filter: Rain and snow filter , Fog Filter, Distance Moving Average, Kalman Filter, Velocity Moving Average,
• Add. function: Selection of a significant range of distances and signal level, selection of the first and last echo in the selected range of distances and signal level
• Average laser life (at 25 °C): 100,000 h
• Max . travel speed: 128 m/s
• Ethernet: ? , TCP/IP
• Serial: ? , RS-422
• SSI: ?
• EtherNet/IP: ?
• Digital input: Internal pull-down resistor, Switching voltage HIGH: min. 13 V...max. supply voltage, switching voltage LOW: max. 5 V, Switching functions: measuring laser deactivation, alignment laser activation, preset,
• Operating temperature range: –40 °C ... +55 °C, –40 °C ... +95 °C , Operation with cooling housing,
• Storage temperature range: –40 °C ... +75 °C
• Max. rel. air humidity (non-condensing): ? 95%
• Influence of air pressure: 0.3 ppm/hPa
• Influence of temperature: –1 ppm/K
• Temperature drift: Typ. 0.25 mm/K
• Typ. Immunity to extraneous light: ? 100,000 lx
• Mechanical strength: Single impact: 30 g / 6 ms according to DIN EN 60068-2-27 (Ea), 6 axes, Repeated impacts: 25 g / 6 ms according to DIN EN 60068-2-27 (fatigue), 500 impacts, 6 axes,
• Function: Setting, Output of measured data (no real-time operation - transmission properties depend on external network)
• Data transfer rate: 10/100 Mbit/s
• Note: Switchable to SSI
• Note: Switchable to RS-422
• Function: Output of measurement results
• Function: Setup, Output of measurement data (distance output value, device status, signal level)
• In1/Q1: Digital input, digital output (switchable )
• QA/Q2: Analogue output, digital output (switchable)
• Quantity: 0 ... 2
• Type: Push-pull mode: PNP/NPN
• Maximum output current I_A: ? 100 mA
• Quantity: 1
• Type: Current output
• Current: 4 mA ... 20 mA
• Resolution: 16 bit
• Category: Long range distance sensors
• Series:Dx1000