Sick EXE-06C6202A020

Safety light curtains

Sick EXE-06C6202A020

Datasheet:

• Item number: 1097725
• Application area: Explosive areas
• Explosion safety approval: ATEX for gases: II 2 G Ex db IIB T6, ATEX for dust: II 2 D Ex tb IIIC T56°C Db IP6X, NFPA 70/NEC 500 Class I, Div. 1, Groups C and D, NFPA 70/NEC 500 Class II, Div. 1, Groups E, F and G, NFPA 70/NEC 500 Class III, Div. 1,
• Part of the system: Receiver
• Resolution: 30 mm
• Protective field height: 600 mm
• Scanning range: 17.6 m
• Synchronization: Optical synchronization
• Type: Type 4 (IEC 61496-1)
• Reliability class: SIL3 (IEC 61508), SILCL3 (EN 62061) ,
• Category: Category 4 (EN ISO 13849)
• Performance level: PL e (EN ISO 13849)
• PFHd (average probability of dangerous failure per hour) : 15 x 10^-9 (EN ISO 13849)
• T_M (specified operating time): 20 years (EN ISO 13849)
• Safe state in case of error: At least one OSSD output is in AUS state (OFF).
• Protected operation?
• Restart Inhibit: ?: External
• External Device Monitoring (EDM): ?: Disabled
• Beam Coding: ?: Uncoded
• Configurable scanning range?
• Reduced resolution: ?: Deactivated
• Fixed blanking: ?: Deactivated
• Selective blanking : ?: Deactivated
• Dynamic blanking for object recognition?
• Self-adjusting dynamic blanking for product identification?
• Self-adjusting dynamic blanking for pallet detection?
• Multiple scoring: ?: Double scoring
• Direction recognition?
• Virtual photo switches?
• Sensor gap control< /td>?
• Sequential control?
• Object input control?
• Detection of geometrically uniform objects?
• Secure communication between SICK devices via EFI/SDL?
• Bypass: ?
• Switching operating modes: ?
• System connection: Connection cable (30 m) with free cable end, 12-wire
• Configuration connection: M8 socket, 4-pin
• Configuration type: PC with CDS (configuration and diagnostic software)
• Indication elements: 7-segment indicator
• Protection class: III (IEC 61140)
• Supply voltage U_V: 24 V DC (19.2 V. .. 28.8 V)
• Residual ripple: ? 10%
• Dimensions: See dimensional drawing
• Case cross-section: 161.8 mm x 142 ,1 mm
• Housing material: Aluminum casting / AlSi7Mg0.6
• Protection type: IP65 (EN 60529), IP66 (EN 60529),
• Operating range temperature: 0 °C ... +55 °C
• Storage temperature: –25 °C ... +70 °C
• Air humidity: 15% ... 95% , non-condensing
• Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6)
• Shock resistance: 10 g, 16 ms (EN 60068-2 -27)
• Wire diameter: 10 mm
• Wire cross-section: 0.75 mmІ
• Integration via Flexi Soft safety controller: CANopen
• : DeviceNet
• : EtherCAT^®
• : EtherNet/IP
• : Modbus TCP
• : PROFIBUS DP
• : PROFINET
• Integration via EFI gateway: CANopen
• : Ethernet
• : PROFIBUS DP
• : PROFIBUS PROFIsafe
• : PROFINET PROFIsafe
• Output type: 2 semiconductors with PNP junction, short-circuit proof, cross-circuit monitoring
• ON state, voltage switching HIGH: 24 V DC (U_V – 2.25 V DC...U_V)
• Off state, switching voltage LOW: ? 3 .5 V DC
• Current load capacity of the output switching device: ? 500 mA
• Output type: PNP output, short-circuit protected
• Output voltage HIGH (active): 24 V DC (U_V – 4.2 VDC...U_V)
• Output voltage LOW (inactive): High impedance
• Output current HIGH (active): ? 100 mA
• Category: Safety light curtains
• Series:C4000 Fusion Ex