Sick FFUS10-1G1IO
Temperature and Flow sensors
- Flow sensor for conductive and non-conductive liquids
- Compact design with no moving parts
- Process temperature up to 80 °C, process pressure up to 16 bar
Item Number:
FFUS10-1G1IO
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Specification:
| Part Number | 6047868 |
| Resolution: | 0.003 l/min |
| Signal voltage LOW: | ≤ 2 V |
| Inlet zone: | 20 cm |
| Lower signal level: | 3.8 mA ... 4 mA |
| Initialization time: | ≤ 5 s |
| Maximum flow: | 21 l/min |
| Ambient temperature operation: | 0 °C ... +60 °C |
| Ripple: | ≤ 5 Vpp |
| Upper signal level: | 20 mA ... 20.5 mA |
| Output load: | < 500 Ohm |
| Process pressure: | Max. 16 bar |
| Process connection: | ½'' NPT |
| Ambient storage temperature: | -20 °C ... +70 °C |
| Capacitive load: | 100 nF |
| Process temperature: | 0 °C ... +80 °C |
| Enclosure rating: | IP 67 |
| Housing material: | PSU |
| Puls width: | ≤ 1 s |
| Medium: | Fluids |
| Conductivity: | No limitation |
| Repeatability: | ≤ 0.5 % |
| Response time: | Filter off 100 ms, filter low 300 ms, filter medium 1 s, filter strong 4.2 s |
| Output current: | < 100 mA |
| Nominal width measuring tube: | NW 10 |
| Output signal: | Analog output: 4 mA ... 20 mA, 0 mA ... 20 mA current flow and temperature 1 pulse/status output: transistor output for flow rate meter, empty pipe detection, flow monitoring, dosing output, flow direction (depending on type) |
| Signal voltage HIGH: | Vs - 2 V |
| Inductive load: | 1 H |
| Wetted parts: | PSU |
| Connection type: | Round connector M12 x 1, 5-pin |
| Accuracy of sensor element: | 2 % (of final value) |
| Weight: | 340 g |
| Impuls/frequency output: | 0 kHz ... 10 kHz |
| Outlet zone: | 0 cm |
| Protection class: | III |
| Power consumption: | ≤ 180 mA |
| Minimim flow: | 0.3 l/min |
| Supply voltage: | 18 V DC ... 30 V DC |
People also buy
Comments
No comments yet