Sick FFUS20-1G1SR
Temperature and Flow sensors

Sick FFUS20-1G1SR
  • Flow sensor for conductive and non-conductive liquids
  • Compact design with no moving parts
  • Process temperature up to 80 °C, process pressure up to 16 bar
Item Number: FFUS20-1G1SR
1024.99
-
+
Total price: 1024.99
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments

Specification:

Part Number6043745
Weight:420 g
Impuls/frequency output:0 kHz ... 10 kHz
Output load:< 500 Ohm
Upper signal level:20 mA ... 20.5 mA
Supply voltage:18 V DC ... 30 V DC
Lower signal level:3.8 mA ... 4 mA
Nominal width measuring tube:NW 20
Process temperature:0 °C ... +80 °C
Protection class:III
Resolution:0.012 l/min
Puls width:≤ 1 s
Inductive load:1 H
Capacitive load:100 nF
Enclosure rating:IP 67
Maximum flow:60 l/min
Initialization time:≤ 5 s
Ambient temperature operation:0 °C ... +60 °C
Ripple:≤ 5 Vpp
Signal voltage LOW:≤ 2 V
Output signal:Analog output: 4 mA ... 20 mA, 0 mA ... 20 mA current flow and temperature
2 pulse/status output: transistor output for flow rate meter, empty pipe detection, flow monitoring
1 digital input for dosing and counter reset
Housing material:PSU
Inlet zone:50 cm
Process connection:G 1
Repeatability:≤ 0.5 %
Minimim flow:3.5 l/min
Ambient storage temperature:-20 °C ... +70 °C
Medium:Fluids
Wetted parts:PSU
Connection type:Round connector M12 x 1, 8-pin
Process pressure:Max. 10 bar
Outlet zone:10 cm
Signal voltage HIGH:Vs - 2 V
Power consumption:≤ 180 mA
Response time:Filter off 100 ms, filter low 300 ms, filter medium 1 s, filter strong 4.2 s
Accuracy of sensor element:2 % (of final value)
Output current:< 100 mA
Conductivity:No limitation

Comments

No comments yet

Write a comment