Sick FTS-H200F04A

Flow sensor

Sick FTS-H200F04A

Datasheet:

• Article: 1091148
• Measurement principle: Calorimetric measurement method
• Media: Water- and oil-based liquids
• Pipe diameter: ? 25 mm
• Operating distance: 3 cm/s ... 150 cm/s, Water, 3 cm/s ... 300 cm/s, Oil,
• Operating temperature: –40 °C ... +150 °C
• Working pressure: ? 100 bar
• Communication interface: IO-Link IO-Link V1.1 COM3 (230.4 kbit/s)
• Temperature measurement: ?
• Minimum flow rate: ? 3 cm/s, for water and oil
• Maximum flow rate: ? 150 cm/s, for water
• Inlet line: 5 x DN
• Outlet line: 3 x DN
• Measuring element accuracy: ± 10% relative to the end value of the measuring range
• Reproducibility: < 1 cm/s
• Resolution: 0.01 m/s, speed - 0.1 l/min volume - 0.1% relative (via IO-Link)
• Rating: < 2.5 s
• Operating mode: Relative speed (%), Absolute speed, Absolute volume, Relative programming (%)
• Supply voltage: 9 V DC ... 30 V DC
• Power consumption: < 2 W at 24 V DC (no output load)
• Initialization time: ? 5 s, ? 10 s ( IO-Link),
• Protection class: III
• Connection type: Circular connector M12 x 1, 4-pin
• Output signal: 2 x push-pull digital output for flow and temperature (Q2 selectable as digital input)
• Output current: < 100 mA
• Signal voltage HIGH: > Uv - 2 V
• Signal voltage LOW: ? 2 V
• Inductive load: 1 H
• Capacitive load: 100 nF (2.5 nF, IO-Link mode)
• EMC: EN 61326-1, EN 61326-2-3
• Digital input limit: High voltage dependent on Uv, Low voltage < 4.0 V,
• Mean time to failure: > 200 years
• Technical connections: Without process connection (adapter required for installation)
• Wetted materials: Stainless steel 1.4404 / 316L
• Housing material: Stainless steel 1.4404 / 316L
• Protection type: IP67 / IP69
• Weight: 210 g
• Sealing material (only for clamp adapter P/N 2093548): FKM
• Probe diameter: 8 mm
• Probe length: 200 mm
• Minimum insert length: 12 mm
• Distance to pipe wall: 10 mm
• Operating temperature range: –40 °C ... +70 °C
• Storage temperature range: –40 °C ... +80 °C
• Resolution (temperature): < 0.1 °C
• Response time (temperature): < 6 s
• Category :Flow sensors
• Series:T-Easic® FTS
• Measuring principle: calorimetric