Sick GTB6L-P6211

Photoelectric Switch

Sick GTB6L-P6211

Datasheet:

• Article: 1109657
• Operating principle: Sensor with reflection from an object
• Operating principle, details: Background suppression
• Polarizing filter: No
• Minimum detectable object (MDO) typ.: 0.4 mm, at a distance of 150 mm (object with diffuse reflectance 90% (corresponding to standard white according to DIN 5033))
• MTTF _D: 662 years
• DC_avg: 0%
• T_M (set operating time ): 10 years (EN 60825-1)
• Supply voltage U_B: 10 V DC ... 30 V DC
• Residual ripple: < 5 V_ss
• Use category (according to EN 60947-5-2): DC-13
• Current consumption: 20 mA, no load. At U_B = 24 V
• Protection class: III
• Housing type: Rectangular
• Dimensions (W x H x D) : 12 mm x 31.5 mm x 21 mm
• Connection: Cable with M8 connector, 4-pin, 336 mm
• Weight: Approx. 60 g
• Protection type: IP67 (EN 60529)
• Operating temperature range: –20 °C ... +50 °C
• Temperature range at storage: –40 °C ... +70 °C
• Typ. immunity to extraneous light: Sunlight: ? 13.000 lx
• Shock resistance: 30 g, 11 ms (3 positive and 3 negative impacts along the X, Y, Z axis, 18 impacts in total (EN60068-2-27) )
• Vibration resistance: 10 Hz ... 55 Hz (Amplitude 0.5 mm, 3x30 min (EN60068-2-6))
• Air humidity: 35 % ... 95 %, Relative Humidity (without fogging)
• Electromagnetic Compatibility (EMC): EN 60947-5-2
• UL File No: NRKH.E348498 & NRKH7.E348498
• Sensing distance min.: 10 mm
• Operating distance max.: 400 mm
• Setting range for background suppression threshold: 30 mm ... 400 mm
• Reference object: Object with diffuse reflectance 90% (corresponds to standard white according to DIN 5033)
• Minimum distance between the set sensing distance and the background (black 6% / white 90%): 3 mm (at a distance of 75 mm)
• Recommended sensing range for greater performance: 30 mm ... 180 mm
• RADIATION SOURCE: Laser
• Type of radiation: Visible red light
• Light spot shape: Spot
• Light spot size (distance): Ш 0.4 mm (150 mm)
• Maximum spread of the emitted beam around the standardized axis of the emitter (deflection angle): < +/-1.5° (at T_U = +23 °C)
• Normative reference: IEC 60825-1 / CDRH 21 CFR 1040.10 & 1040.11
• Laser class: 1
• Wavelength: 680 nm
• Pulse duration: 2 µs
• li>Maximum pulse power: < 5.94 mW
• Average service life: 100,000 hours at T_U = +25 °C
• Potentiometer: For sensing distance settings, 5 turns
• Mode switch: To invert the trigger function (light/dark switching)
• LED, green: Power indicator, Always on: power on
• Yellow LED: Beam reception status, Always on: object present, Always off: object not present
• Quantity: 1
• Type: PNP
• Signal voltage PNP HIGH/LOW: Approx. U_B-3 V / 0 V
• Output current I_max.: ? 100 mA
• Protective circuits, outputs: With reverse polarity protection
• : With overcurrent protection
• : Short circuit protected
• Response time: ? 625 µs
• Switching frequency: 1.000 Hz
• Number: 0
• Function of pin 4 / black (BK): Switching output, activated by reflected light, object present ? output Q HIGH
• Function of pin 4 / black (BK) - details: The function of pin 4 of the sensor can be switched, other settings are possible via the operating mode switch
• Deep cooling characteristic: Do not deform the cable below 0 °C
• Cable cross-section: 0.14 mmІ
• Cable diameter: Ш 8 mm
• Cable length: 300 mm
• Housing: Plastic, ABS
• Faceplate: Plastic, PMMA
• Cable: PVC
• Connector: Copper alloy (C3604 CUZN39PB3)
• Series:G6
• Sensing distance:30 … 180 mm
• Type of radiation: visible red light