Sick IM05-0B8PS-ZT1

Inductive proximity sensor

Sick IM05-0B8PS-ZT1

Datasheet:

• Article: 6020110
• Housing type: Cylindrical with thread
• Housing design: Standard design
• Thread size: M5 x 0.5
• Diameter: Ш 5 mm
• Sensing distance S_n: 0.8 mm
• Sensing distance ensured S_{a< /sub>: 0.648 mm}
• Mounting: Flush
• Switching frequency: 5,000 Hz
• Connection type: M8 connector, 3-pin
• Switching output: PNP
• Output function: Normally open
• Electrical version: DC. current, 3-wire
• Protection type: IP67
• Supply voltage: 10 V DC ... 30 V DC
• Residual ripple: ? 20%
• Voltage drop: ? 2 V
• Current consumption: 10 mA
• Ready delay: ? 10 ms
• Hysteresis: 1 % ... 10%
• Reproducibility: ? 1.5%
• Temperature deviation (from S_r): ? 10%
• EMC: EN 60947-5-2, IEC 61000-4-2: (test level 2), IEC 61000-4-4: (test level 2),
• Short circuit protection: ?
• Polarity inversion protection: ?
• Shock and vibration resistance: 30 g, 11 ms/10...55 Hz, 1 mm
• Operating temperature range: –25 °C. .. +70 °C
• Case material: Stainless steel V2A, DIN 1.4305 / AISI 303
• Material, active surface: Plastic, POM
• Case length: 38 mm
• Usable thread length: 22 mm
• Max. tightening torque: ? 1.5 Nm
• Supply includes: Fastening nut, stainless steel V2A (2 pcs.), Washer, stainless steel V2A, with locking gear (2 pcs.),
• UL File No.: NRKH.E191603
• MTTF_D: 2,150 years
• DC_avg: 0 %
• Note: Values are indicative and subject to change
• Stainless steel (V2A): Approx. 0.8
• Aluminum (Al): Approx. 0.5
• Copper (Cu): Approx. 0.45
• Brass (Ms): Approx. 0.55
• Note: For relevant graphic materials, see section. “Installation instructions”
• A: 0.8 mm
• B: 0 mm
• C: 5 mm
• D: 2 ,4 mm
• E: 0 mm
• F: 7 mm
• Series:IMM
• Sensing distance:0.8 mm
• Output type:PNP
• Installation: flush
• Housing type: cylindrical with thread
• Output signal function: NC