Sick IM18-05BUS-ZU0

Inductive proximity sensor

Sick IM18-05BUS-ZU0

Datasheet:

• Article: 7902122
• Case type: Cylindrical with thread
• Case design: Standard
• Thread size: M18 x 1
• Diameter: Ш 18 mm
• Sensing distance S_n: 5 mm
• Sensing distance ensured S_a: 4 ,05 mm
• Installation: Flush
• Switching frequency: 25 Hz, 100 Hz,
• Connection type: Cable, 2-wire, 2 m
• Output function: Normally open
• Electrical version: AC/DC current, 2-wire
• Protection type: IP67
• Supply voltage: 20 V AC/DC ... 250 V AC/DC
• Voltage drop: ? 6.5 V AC, ? 6 V DC
• Ready delay: ? 8 ms
• Hysteresis: 1 % ... 15 %
• Reproducibility: ? 10 %
• Temperature deviation (from S_r): ± 10%
• EMC: According to EN 55011, class B
• DC I_a: ? 350 mA , ? 250 mA , ? 100 mA ,
• Residual current: ? 2.5 mA (AC 250 V), ? 1.3 mA (AC 110 V), ? 0.8 mA (DC 24 V),
• Minimum load current: ? 5 mA
• Short-term current: 2.2 A
• Cable material: Polyurethane
• Cable cross-section: 0.5 mmІ
• Short circuit protection: –
• Suppression of switching pulse: ?
• Shock and vibration resistance: 30 g, 11 ms/10…55 Hz, 1 mm
• Operating temperature range: –25 °C ... +80 °C
• Housing material : Brass, nickel-plated
• Material, active surface: Plastic, PBT
• Case length: 80 mm
• Usable thread length: 58 mm
• Max. tightening torque: ? 35 Nm
• Supply set: Fastening nut, brass, nickel-plated (2 pcs.)
• Protection class: II
• Rated insulation voltage U _i: 250 V AC
• Consumption category: AC-140, DC-13,
• Degree of pollution: 3
• Maximum permissible impulse voltage: 4 kV
• Note: Values are indicative and subject to change
• Stainless steel (V2A): Approx. 0.8
• Aluminum (Al): Approx. 0.45
• Copper (Cu): Approx. 0.4
• Note: For relevant graphic materials, see section. “Installation instructions”
• A: 0 mm
• B: 18 mm
• C: 18 mm
• D: 15 mm
• E: 0 mm
• F: 40 mm
• Series:IM Standard
• Sensing distance: 5 mm
• Mounting: flush
• Housing type: cylindrical with thread
• Output function:NC