Sick IMA18-10BE1ZC0K
Inductive proximity sensor
IMA18-10BE1ZC0K INDUCT.PROXIM.SENS. art. 6041793
Item Number:
IMA18-10BE1ZC0K
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Sick IMA18-10BE1ZC0K
Datasheet:
- Article: 6041793
- Case type: Cylindrical with thread
- Thread size: M18 x 1
- Diameter: Ш 18 mm
- Sensing distance Sn: 0 mm ... 10 mm
- Mounting: Pseudo-flush
- Connection type: M12 connector, 4-pin.
- Output function: Analog
- Reproduction accuracy: 0.3 mm
- Repeatability stability (TA constant): ± 0 ,02 mm
- Resolution: ? 2 µm
- Protection type: IP67
- Special properties: Analog output
- Supply voltage: 15 V DC ... 30 V DC
- Residual ripple: ? 20%
- Ready delay: ? 50 ms
- Temperature deviation (from Sr< /sub>): ? 10%
- No-load current typ.: ? 12 mA
- Load current: ± 10 mA
- Max. load resistance: ? 400 ? Ub = 15 V, ? 1.000 ? Ub = 30 V,
- Output voltage at QA1: s = 0 mm: 0 V/-0 + 0.4 V (23 °C), s = 5 mm: +5.2 V/ +-0.4 V (23 °C), s = 10 mm: +10 V/ +-0.4 V (23 °C),
- Output current at QA2: s = 0 mm: 4 mA/ +-0.8 mA (23 °C), s = 10 mm: 20 mA +/-0.8 mA (23 °C),
- Output voltage: 0 V ... 10 V
- Range: 500 Hz
- Protection against short circuit: ?
- Polarity inversion protection: ?
- Operating temperature range: –25 °C ... +70 °C
- Housing material : Brass, chrome-plated
- Material, active surface: Plastic, PTB
- Body length: 48.5 mm
- Usable thread length: 32 mm
- Supply set: Fastening nut, brass, chrome-plated (2 pcs.), Washer, brass, chrome-plated, with locking gear (2 pcs.),
- MTTFD: 394 years
- DCavg: 0 %
- Note: Values are indicative and subject to change
- Stainless steel (V2A) : OK. 0.6
- Aluminum (Al): Approx. 0.18
- Copper (Cu): Approx. 0.15
- Brass (Ms): Approx. 0.28
- Note: For relevant graphic materials, see section. “Installation instructions”
- A: 10 mm
- B: 26 mm
- C: 18 mm
- D: 30 mm
- E: 4 mm
- F: 100 mm
- Series:IMA
- Sensing distance: 10 mm
- Output type: analog
- Mounting: pseudo-flush
- Case type: cylindrical with thread
People also buy
Comments
No comments yet