Sick IMC12-04BPPVC0SB02

Inductive proximity sensor

Sick IMC12-04BPPVC0SB02

Datasheet:

• Article: 1097434
• Case type: Cylindrical with thread
• Thread size: M12 x 1
• Diameter: Ш 12 mm
• Sensing distance S_n: 0 mm ... 4 mm
• Sensing distance ensured S_a: 3.24 mm
• Switching modes: Single point
• Switching frequency Qint.1 / Qint.2 on pin 2:: 1.000 Hz
• Installation: Flush
• Type of connection : M12 connector, 4-pin.
• Switching output: PNP
• Q/C output: switching output or IO-link mode
• MFC output: switching output or input
• Output function: Normally open
• Electrical version: DC. current, 4-wire
• Protection type: IP68, IP69K,
• Special properties: IO-Link
• Diagnostics: Chip temperature
• Pin 2 configuration: Learn
• Supply voltage: 10 V DC ... 30 V DC
• Residual ripple: ? 10%
• Voltage drop: ? 2 V
• Current consumption: 35 mA
• Hysteresis: 1% of programmed digital value
• Reproducibility: ? 5%
• Temperature deviation (from S _r): ± 10%
• EMC: According to EN 60947-5-2
• DC current I_a: ? 200 mA
• Short circuit protection: ?
• Polarity inversion protection: ?
• Suppression of switching pulse: ?
• Shock and vibration resistance: 100 g/5 ms/500 cycles - 150 g/1 million cycles - 10...55 Hz, 1 mm/55...500 Hz/60 g
• Operating temperature range: –40 ° C ... +75 °C
• Housing material: Stainless steel V2A, DIN 1.4305 / AISI 303
• Material, active surface: Plastic, LCP
• Length body: 65 mm
• Usable thread length: 48 mm
• Max. tightening torque: Typ. 32 Nm
• Supplied with: Fastening nut, stainless steel V2A, with locking gear (2 pcs.)
• UL File No.: E181493
• Teaching accuracy: +/- 3% of Sr
• Resolution, typical (range): 10 µm (0 mm ... 1 mm), 20 µm (1 mm ... 3 mm), 40 µm (3 mm ... 4 mm),
• Resolution, maximum (range): 20 ?m (0 mm ... 1 mm), 40 ?m (1 mm ... 3 mm), 75 ?m (3 mm ... 4 mm),
• Communication interface: IO-Link V1.1
• Communication interface, detailed description: COM2 (38.4 kBaud)
• Cycle time: 5 ms
• Process data length: 32 Bit
• Process data structure: Bit 0 = digital signal Q_L1, Bit 1 = digital signal Q _L2, Bit 2 = digital signal Q_Int3, Bit 3 = digital signal Q_Int4, Bit16 ... 31 = distance value,
• Default settings: Switching point 1: set value 1, Output: normally open,
• Note: The numerical set value for the switching point in mm is stored in the sensor
• Set value 1: 4 mm
• Set value 2: 3 mm
• Set value 3: 2 mm
• Set value 4: 1 mm
• li>Stainless steel (V2A): Approx. 0.7
• Aluminum (Al): Approx. 0.4
• Copper (Cu): Approx. 0.3
• Brass (Ms): Approx. 0.4
• Note: For relevant graphic materials, see section. “Installation instructions”
• B: 12 mm
• C: 12 mm
• D: 12 mm
• F: 32 mm
• Series:IMC
• Sensing distance:4 mm
• Output type:PNP
• Installation:flush
• Case type:cylindrical with thread
• Output function:NC