Sick IMC12-08NPPVC0SB00

Inductive proximity sensor

Sick IMC12-08NPPVC0SB00

Datasheet:

• Article: 1093141
• Case type: Cylindrical with thread
• Thread size: M12 x 1
• Diameter: Ш 12 mm
• Sensing distance S_n: 0 mm ... 8 mm
• Sensing distance ensured S_a: 6.48 mm
• Number of switching points: Up to 4 configurable switching points or windows
• Switching modes: Single point, Window mode, Two point mode, Visual adjustment aid
• Switching frequency Qint. 1 / Qint.2 on pin 2:: 1.000 Hz
• Mounting: With protruding part
• Connection type: M12 connector, 4-pin.
• Switching output: PNP
• Q/C output: switching output or IO-link mode
• MFC output: switching output or input
• Output function: Normally closed / Normally open
• Selectable switching properties: Programmable
• Electrical version: DC. current, 4-wire
• Protection type: IP68, IP69K,
• Special properties: Smart Task, Resistant to coolants and lubricants, IO-Link
• Special Applications: Coolant and Lubricant Areas, Harsh Environments
• Special Option: 16 Digit Resolution
• Diagnostics: Chip Temperature
• Pin 2 Configuration: External input, teach, discrete signal
• Supply voltage: 10 V DC ... 30 V DC
• Residual ripple: ? 10%
• Voltage drop: ? 2 V
• Current consumption: 35 mA
• Hysteresis: Programmable
• Reproducibility: ? 5%
• Temperature deviation (from S _r): ± 10%
• EMC: According to EN 60947-5-2
• DC current I_a: ? 200 mA
• Short circuit protection: ?
• Polarity inversion protection: ?
• Suppression of switching pulse: ?
• Shock and vibration resistance: 100 g/ 5 ms/500 cycles - 150 g/1 million cycles - 10...55 Hz, 1 mm/55...500 Hz/60 g
• Operating temperature range: –40 °C .. +75 °C
• Case material: Stainless steel V2A, DIN 1.4305 / AISI 303
• Material, active surface: Plastic, LCP
• Case length: 65 mm
• Usable thread length: 43 mm
• Max. tightening torque: Typ. 32 Nm
• Supplied with: Fastening nut, stainless steel V2A, with locking gear (2 pcs.)
• UL File No.: E181493
• Teaching accuracy: +/- 3% of Sr
• Resolution, typical (range): 20 µm (0 mm ... 4 mm), 50 µm (4 mm ... 6 mm), 100 µm (6 mm ... 8 mm),
• Resolution, maximum (range): 40 ?m (0 mm ... 4 mm), 100 ?m (4 mm ... 6 mm), 200 ?m (6 mm ... 8 mm),
• Communication interface: IO-Link V1.1
• Communication interface, detailed description: COM2 (38.4 kBaud)
• Cycle time: 5 ms
• Process data length: 32 Bit
• Process data structure: Bit 0 = digital signal Q_L1, Bit 1 = digital signal Q _L2, Bit 2 = digital signal Q_Int3, Bit 3 = digital signal Q_Int4, Bit16 ... 31 = distance value,
• Default settings: Switch point 1: set value 1, Output: normally open, Pin configuration 2: input,
• Note: The numerical set value for the switch point in mm is stored in the sensor
• Set value 1: 8 mm
• Set value 2: 6 mm
• Set value 3: 4 mm
• Set value 4: 2 mm
• Stainless steel (V2A): Approx. 0.7
• Aluminum (Al): Approx. 0.4
• Copper (Cu): Approx. 0.4
• Brass (Ms): Approx. 0.4
• Note: For relevant graphic materials, see section. “Installation Instructions”
• A: 12 mm
• B: 24 mm
• C: 12 mm
• D: 24 mm
• E: 16 mm
• F: 64 mm
• Intellectual task designation: Basic logic
• Logic function: AND, OR, XOR, Hysteresis,
• Timer Function: On Delay, Off Delay, On/Off Delay, Pulse (One Shot),
• Inverter: Adjustable
• Switching Frequency: SIO Direct: 1000 Hz, SIO Logic: 1000 Hz, IOL: 1000 Hz,
• Discrete signal Q_L1: Switching output
• Discrete signal Q _L2: Switching output
• Series:IMC
• Sensing distance:8 mm
• Output type:PNP
• Installation:with protruding part
• Housing type :cylindrical with thread
• Output signal function:NO / NC