Sick IMC18-07BPDZC0SA05 IH/IM Inductive proximity sensor

Sick IMC18-07BPDZC0SA05
Item Number: IMC18-07BPDZC0SA05
  • Speed and acceleration monitoring
  • Monitoring range: 6 to 12,000 pulses/min. and 0.1 to 2 pulses/sec.²
  • Switching and pulse output
Total price: 154.28
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments


Part Number1061987
Stainless steel (V2A, 304):0.8
Process data structure:1 bit pulse output, 1 bit switching output, 14 bit measured value
Ambient operating temperature:-25 °C ... +75 °C
D:18 mm
Tightening torque, max.:≤ 40 Nm
Power-up pulse protection:+
Supply voltage:10 V DC ... 30 V DC
Minimum response time:Mode acceleration monitoring 1 sec, Mode speed monitoring 50 ms
Temperature drift (of Sr):± 10 %
Output Q Imp:Pulse output (The pulse sequence corresponds to the damping frequency)
Mode:COM 2 (38k4)
Cycle time:5 ms
Installation type:Flush
Copper (Cu):0.4
Repeatability:≤ 2 %
F:56 mm
Status indicator Q:LED, blau
C:18 mm
Acceleration range, adjustable:0.1...2 impulses / sec²
Housing material:Metal, Nickel-plated brass
Output Q:Output type (dependant on the adjusted threshold)
Note:The values are reference values which may vary
B:18 mm
Ripple:≤ 10 %
Status indicator QImp:LED, yellow
Thread size:M18 x 1
Carbon steel St37 (Fe):1
Assured sensing range Sa:5.6 mm
Power consumption:≤ 35 mA
Hysteresis:5 % ... 15 %
Connection type:Connector M12, 4-pin
Reverse polarity protection:+
Housing cap material:Plastic, PA6
Sensing range Sn:7 mm
Short-circuit protection:+
Output function:NO
Wire-break protection:0
Electrical wiring:DC 4-wire
Process data length:16 Bit
Voltage drop:≤ 2.5 V
Aluminum (Al):0.45
Shock/vibration:30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
Output current Ia:≤ 100 mA
Time delay, adjustable:Mode 0: No start-up delay
Mode 1: 0...254 sec., adjustable
Mode 2: When reaching the upper threshold
Switching output:PNP
Fieldbus integration:IO-Link V1.0
Enclosure rating:IP 67
Speed range, adjustable via two thresholds:6...12,000 impulses / min
Brass (Br):0.4
Factory setting:Operating mode: acceleration monitoring, Threshold acceleration: 1 pulse/sec², Start-up delay mode: time delay, Upper/lower threshold speed: 200/300 pulses/min, Time delay: 5 sec
EMC:According to EN 60947-5-2
Housing length:69 mm
Thread length:52 mm
Remark:Associated graphic see "Installation"


No comments yet

Write a comment