Sick IME12-04BDSZQ9S

Inductive proximity sensor

Sick IME12-04BDSZQ9S

Datasheet:

• Article: 1068718
• Case type: Cylindrical with thread
• Case design: Standard
• Thread size: M12 x 1
• Diameter: Ш 12 mm
• Sensing distance S_n: 4 mm
• Sensing distance ensured S_a: 3 ,24 mm
• Mounting: Flush
• Switching frequency: 2,000 Hz
• Connection type: Cable with M12 connector, 4-pin, 0.3 m
• Output function: Normally open
• Electrical version: DC. current, 2-wire
• Protection type: IP67
• Supply voltage: 10 V DC ... 30 V DC
• Residual ripple: ? 10%
• Voltage drop: ? 4 V , ? 4.5 V ,
• Ready delay: ? 100 ms
• Hysteresis: 5% ... 15%
• Reproducibility: ? 2%
• Temperature deviation (from S_r): ± 10%
• EMC: According to EN 60947-5-2
• Constant current I_a: ? 100 mA
• Residual current: ? 0.8 mA
• Minimum load current: ? 3 mA
• Cable material: PVC
• Wire diameter: Ш 3.9 mm
• Short circuit protection: ?
• Inversion protection polarity: ?
• On pulse: ? 5 ms
• Shock and vibration resistance: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
• Operating temperature range: –25 °C ... +75 °C
• Housing material: Nickel-plated brass
• Active surface material: Plastic, PA 66
• li>Body length: 63 mm
• Usable thread length: 48 mm
• Max. tightening torque: ? 12 Nm
• Supply contents: Fastening nut, brass, nickel-plated (2 pcs.)
• UL File No.: NRKH.E181493
• Note: Values are indicative and subject to change
• Steel St37 (Fe): 1
• Stainless steel (V2A): Approx. 0.8
• Aluminum (Al): Approx. 0.45
• Copper (Cu): Approx. 0.4
• Brass (Ms): Approx. 0.4
• Note: For relevant graphic materials, see section. “Installation instructions”
• B: 24 mm
• C: 12 mm
• D: 12 mm
• F: 32 mm
• Series:IME
• Sensing distance:4 mm
• Mounting: flush
• Housing type: cylindrical with thread
• Output signal function: NC